Map Editor Suggestions
Welcome to the Map Editor's suggestion box!
This is the place to share your ideas for improving the Waze Map editor.
410 results found
-
JB, RRC, Camera: Edit only when the layer is on
For Place you have to enable the layer. This is a good feature so you can‘t create something what is still there but hidden.
Can you expand this also to JB, RRC, Camera?42 votes -
Disable segment geometry changes in House Number mode
When in the "Edit House Numbers" mode, the Editor allows changes to segment geometry, but then generates an error when saving the changes. It is very easy to unknowingly edit segment geometry when trying to move a house number stop point. When this occurs, any HNs edited after that geometry change need reverted.
Please disable segment geometry changes when in HN mode.
42 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
POI's moving distance
At the moment moving a POI have a distance limitation (2km I belive?) Sometimes when a business changes phisical place to another place, like 10km away, we need to move the POI like 2km, save, move again, save again...
It makes no sense. Please remove it or allow us to move POIs further.
Thank you.
40 votes -
Add a penalty to PR crossing an LS+ junction
Suggest adding a penalty to all PR segments that junction with an LS+ segment for continuation. That is, do not continue on to another PR segment unless necessary.
This would be helpful for alleyways in cities to force the user to an LS+ segment instead of continuing alleyway to alleyway.
Also useful for local-access only situations were we want to force a user off the PR segments ASAP. I can't think of any situations where this would be an issue as if the destination is on a subsequent PR segment, that would rule.
40 votes -
Add a new UR Issue filter "Last comment by" - "Not Me"
Please add a new UR filter in the "Last comment by" drop-down - called "Not me".
In conjunction with the "Comment by me" filter, this will then allow me to see all URs that I have commented on in the past, but I wasn't the last person to reply. This will include the reporter and other editors.
Currently, if I select Reporter, I cannot see URs that other editors have last commented on. If I select All, I will see them, but also all of my reports that I was the last commenter on.
39 votes -
Conditional lane guidance
There are many cases in highways where there is an on-ramp shortly followed by an off-ramp. In those cases, the right lane/s serve for those who get on the HW from the on-ramp, as well as those who get off the HW on the off-ramp.
A wazer that gets on the HW from the on-ramp and has to continue on the HW should get lane guidance to go onto the left lanes when approachng the next junction of the off-ramp, otherwise, he might continue on the right lanes and get off the HW.
A wazer that comes on the HW…39 votes -
Recategorizing UR's when solving
Add a feature to WME to recategorize the Solved UR's when closing those. This would give Waze a true insight of what reports are really needed and vice versa, what are rare and could actually just be within General Error category etc. Based on my research of all Solved UR's in Finland for last 3 months only about 50% were in right category.
In my opinion this would help to reduce and refocus UR categories to better match with reality which in turn helps users when they are reporting meaning less UR's with wrong category -> Better data and better…
39 votes -
Junction box, add ability to demand a pass or mark as private for specific route
Junction box is still evolving so it would be good to add one more feature to it. We have situations where driving through a longer section of road is only permitted with certain conditions but driving to an address in between or to drive across the affected street from different direction is always allowed.
Thinking about a possibility that those conditions could be set as a pass and then apply it only to specific route in junction box. This could probably also be used in a way that you could set a specific route to be private road in routing,…
37 votes -
Show stop points in the House Numbers layer
The House Numbers layer currently displays only the location of the HN, but not the stop point on the related segment. In HN editing mode, when you select the HN, the stop point also becomes visible, with a dotted line from the HN to the stop point. Suggestion is to display the stop point and the dotted line as part of the House Numbers layer, even when not in HN editing mode. (This might either be visible only at a high-enough zoom level, such as 18, or be an option that the user could enable from the layers menu.)
33 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Add a keyboard shortcut to toggle the Issues Layer
The new issues layer is not linked with a keyboard shortcut to toggle it on/off, at it is the case for other layers like roads, place, closure,....
This would really help, especially for koifish suggestion, so we can quickly toggle on/off the suggestion and see what's under it on the image, or even if there is not a already existing segment hidden by suggestion.
33 votes -
Ability to readjust junction boxes
At the moment junction boxes can be drawn when they are being created. After the junction box is saved, the form of the boxes can't be adjusted anymore.
This is problematic because:
a) Now it is possible to move nodes inside a junction box. But if the junction box is too small, there is not enough space to sufficiently correct and move a node.b) If the junction box is not sufficient it must be deleted and recreated in order to correct some bad edits. This leads to a loss of all saved cross-times, which affects routing for a period…
31 votes -
Add keyboard shortcut for issue resolution buttons
Please add keyboard shortcuts for the Green and Grey buttons ("Not Identified" and "Solved" or their equivalents) options within URs/PURs/MPs.
30 votes -
Make RPPs a bright pink
Change the colour of the RPP from a camouflaged dusky pink (same shade used to literally camouflage reconnaissance Spitfires in WWII) to a bright pink like #fa0584 to make it more visible in urban backgrounds.
30 votes -
Speed limit map error
I would insert the ability to see the speed limit map errors reported by users with the function to be enabled or disabled in the control panel.
This possibility, unfortunately, is only available for those who have access to the WME beta but it can be free for everyone.30 votes -
Closed Place - Permanent/Temporary
Suggestion:
"Place Closure" Feature.
Please provide an option for editors to mark any place as closed, preferably with permanent closure or temporary closure options. Based on these two choices, branching options should be displayed.
For example, if a place is marked as permanently closed, the reason should be displayed along with an option to delete the place from the map.
If it is temporarily closed, options for duration and reason should be shown.Additionally:
Display a warning to drivers before starting the journey, along with a red icon indicating that the place is closed.Many people I have spoken to…
29 votes -
Enable zoom keyboard shortcuts (Shift + up/down) when Streetview is open
Zoom keyboard shortcuts (Shift + up/down) are not working when Streetview is open. Please bring them back :)
They were intentionally disabled apparently - see forum post for more info: https://www.waze.com/forum/viewtopic.php?p=2362272
28 votes -
No feedback provided if permalink is unable to select items
Currently there is no feedback given if one or more items are not selected when opening a permalink (i.e segments, places, URs, etc.).
For instance, I have a document with PLs of segments that are always closed during events (such as stadiums). If a segment ID is changed and therefore no longer linked in the PL, I have no way of easily knowing this.
Please consider providing some sort of warning if WME is unable to locate all the linked items.
27 votes -
Add checkboxes to flag unusable/inaccessible gas stations
Editors occasionally find angry URs from drivers who couldn't use or reach stations listed in their gas-station finder. For example, a substantial fraction of drivers -- the majority? -- cannot use non-gasoline fuel, cardlocked stations, military-only stations, or private stations located inside secure installations. Many cannot use members-only stations, such as Costco in the US.
One way to prevent these misroutings would be to add checkboxes for limited-audience gas stations, for example as follows. The app could then let drivers opt in as desired.
In WME, the list might read:
- Military only
- Members only
- Non-gasoline fuels only…27 votes -
Allow applying A->B closures on B->A segments (and vice versa)
When selecting a one-way segment with a closure, and another segment without a closure, it is currently possible to select "Apply on all" to extend the closure to the second segment.
This only works if the second segment has the same one-way direction of the first segment.
When a segment with an A->B/B->A closure is selected, add a new option "Apply closure in any direction", which applies the currently selected closure as "both" on all additional selected segments.
26 votes -
Seasonal Roads
In almost every climate, there is some time of seasonal weather condition that closes roads at least temporarily during a season.
For example, in the winter, some municipalities will not plow certain roads where the roads are not servicing any addresses. These roads are legally open, but may not be passable by most vehicles except during periods of melt or the end of the season melt. In other areas, seasonal rains or snowmelt mean that dirt roads are impassible to most vehicles several days at a time due to mud, but are usable in drier spells during that season. Because…
26 votes
- Don't see your idea?