Map Editor Suggestions
Welcome to the Map Editor's suggestion box!
This is the place to share your ideas for improving the Waze Map editor.
43 results found
-
Prompt user to save Lane changes if deselecting segment
After editing Lanes, it's far too easy to lose the changes by accidentally deselecting the selected segment you are editing if you don't apply the changes beforehand.
This suggestion is to recognise that changes have been made in Lanes (or road width), and prompt the user to apply or cancel the changes if they deselect the segment they are editing.
99 votes -
To automatically remove duplicates from "external providers"
If you have have duplicates in the "external providers" of a POI, WME should automatically clean it. See example for this one which has twice the same Google Maps place :
103 votes -
Route of Last Resort RTC
Ability to create an RTC (or TBSR) that will permit routing on the segment as a last resort (effectively make it a PR from a penalty perspective).
This would be very helpful for soft construction closures that are marked "local traffic only"
82 votesThanks to all who submitted and voted on this suggestion! It has been added to our backlog.
-
Display international and state-level borders in WME
A quality-of-life improvement for WME that would make cross-border editing easier.
81 votes -
Segregating effective and suggested closures
WME shows two kinds of closures:
- effective closures, affecting routing and visible on livemap
- suggested closures, non affecting routing and not visible on livemap. Those suggested closures always have a duration equal to a multiple of 24 hours, starting and ending at the same time of day (on different days, obviously), and are usually created by editors having a layer lower than 3. Those suggested closures result from closure reports made from the app.
The WME displays both kind of closures using exact same visuals: it is necessary to open and examine the closure, to determine if it…32 votes -
Editing fuel types for each Gaz station in WME
It would be nice if the types of fuel at Gas stations could be created, selected and sorted for each specific Gas station when editing directly in the WME.
The main thing is that for each Gas station it was possible to create its own set of fuel types.
For example:
for one - Gas, 92, 95, Diesel
for the other - 92, 95, 98, Diesel
etc.Because all Gas stations are Different!!!
107 votes -
Select segments included in permalink regardless of zoom level
When handling unlock requests for larger areas, or when doing extensive highway closures, we often deal with permalinks that cover a broad area.
To combat the problem currently, we have to break up the PLs, or use a script to select segments as we pan around.
It would be exceptionally helpful and a great time saver if WME would load and select segments that are specified in a PL regardless of the zoom level.74 votes -
POI's moving distance
At the moment moving a POI have a distance limitation (2km I belive?) Sometimes when a business changes phisical place to another place, like 10km away, we need to move the POI like 2km, save, move again, save again...
It makes no sense. Please remove it or allow us to move POIs further.
Thank you.
46 votes -
Restrictions feature (TBR): Limit access by editor level
The restrictions tool used to be simpler a few years ago. Today it allows to setup not only time/days restrictions but also permits/passes, number of passengers, toll roads and more. With new options such as "allowed", "toll free" and "prohibited" it became confusing even for higher rank editors sometimes.
I've lost count of how many times I checked editors that made 1-2 edits and that added a 24/24h 7/7d permanent restriction on what should be a simple "private road". Or even setup a freeway pass on a simple street.
This tool has become extremely complex and powerful, especially since routing…
59 votes -
combine Lane guidance segments
With the newly implemented Lane guidance we see new problems rising up.
In belgium, beeing densly populated, we somtimes have several entry's or exits of the highway following up on each other very closely.
sometimes even as close as 20-50 meters.I would like to have a sort of junction box type of tool to combine 2 lange guidance segments.
for example:
2 highway exits within 50 meters. I want the Lane guidance before the first exit to allready show in what lane I have to stay if I have to take the 2nd exit.It's kind of hard to…
68 votesHey,
Thank you for this suggestion.
We have added it to our back log. It will take some time. But it will be be solved as part of JB revamp.Thanks
-
Add manual lock level to Junction Boxes
Currently, Junction Boxes do not have a controllable lock level. From the look of it, the lock level displayed is the minimum level for the country that can edit a JB. For example, in the UK only L5+ editors can edit JBs, so all JBs show auto(5) in WME.
With various changes that HQ are making into WME and the app, it seems to me that they expect a massive increase in JBs over time. U-turn prevention, junction modification for Falcon are just some of the things for which the answer often seems to be "use a JB".
I'm not…
113 votes -
WME frontend should show backend errors
Hi,
when saving, if the backend fails, it returns a message. But often they are not localized, and in that case we get a generic
"Please try again later" which is useless because in most case the problem will not solve and the only solution is to cancel all edits.
Here is a list of messages that are not localized and need to be displayed (maybe not exactly in the same form, but at least do not tell the user to try again if it is impossible that it works.Invalid street 0 was set for venue ID -100
Missmatch…11 votesHey!
Thank you very much for this great suggestion.
It was added to our backlog to try and see the possibility to implement it.Please note there is no ETA for it yet.
Best,
Hezi -
Show RPP PUR's on feed list
There is no privacy issue involved here.
There's simply a pin in the map, among many others, but I can't find them like any others, just because category is "residential"
The privacy issues are solved by the already omitted creator/updater of the place. By not showing them, you are simply making it harder for the PUR be moderated, as we have to scan the map or rely on scripts to do that.
So, plainly: RPP PUR's should be shown in feed list just as any other PUR.
OBS: Previous discussion took place here: https://www.waze.com/forum/viewtopic.php?f=211&t=249211&p=1774596#p1774596
By: biuick84
Link to original suggestion: …6 votesHey!
Thank you very much for this great suggestion.
It was added to our backlog to try and see the possibility to implement it.Please note there is no ETA for it yet.
Best,
Hezi -
Keep previous history for merged/split segments
Hello!
I think it would be very helpful if segment history included data from previous "iterations" of that segment, when a segment was created by merge or split.
Right now, the history starts anew any time there is a new segment ID, but I would imagine it should be fairly trivial to develop a backend mechanism that, any time a segment is split or merged, merges the history of the previous segment ID into the new segment's history.
This is useful not only diagnostically but also to catch cheaters on the map, who today can split and merge segments at…
135 votesHey!
Thank you very much for this great suggestion.
It was added to our backlog to try and see the possibility to implement it.Please note there is no ETA for it yet.
Best,
Hezi -
[Segment Attribute Request] Treat 2 Way as Divided
I would like to have the ability to draw a single 2-way segment but be able to mark it as divided so it does not say you have arrived until on correct side of road. Sometimes you may have a segment that may not really need to be divided into 2 One-Way segments but if you want routing to offer the correct directions you would have to divide the segments. In my picture below, the red line shows what Waze currently does (it says you have arrived as you pass the house) The green line shows what it should be…
102 votesHey,
This topic may not answered as part of the suggestion up until now, but it has been discussed multiple times across the relevant teams.
We will keep on updating with any news
Best,
Hezi -
[Request] Map Comments Expiration Notification
When a Map Comment (MC) has been entered and is nearing its expiration (2 weeks in advance or 1 week in advance), notify and/or place a note in the Feed of the expiring MC.
This would allow the editor to verify if the MC is still needed, extend it, and/or reconnect road segments where a long-term project may have warranted segment disconnects instead of long-term RTCs.
If roads were disconnected and the project is nearing completion, this would allow the editor to reconnect the segments and then add RTCs so routing could occur immediately upon the completion of the project…
59 votesHey!
Thank you very much for this great suggestion.
It was added to our backlog to try and see the possibility to implement it.Please note there is no ETA for it yet.
Best,
Hezi -
RTC : ability to add them on current tiles
Hi,
the real time closure have a problem :We put them in WME and WME validates them according to their current state in database. But they apply on livemap.
Imagine I have a street that is A->B. Then they decide to reverse it. So it is now saved B->A.
In WME I have B->A
In livemap I still have A->B until tiles update.To avoid routing people A->B, it would be nice to add a closure, but WME refuse since it thinks the road is in opposite direction.
It would be nice if WME could accept it by really…
20 votesHey!
Thank you very much for this great suggestion.
It was added to our backlog to try and see the possibility to implement it.Please note there is no ETA for it yet.
Best,
Hezi -
Better history for place update
Hey,
in place edit history, it would be nice to have more details on PUR : the only status is accepted or rejected.
Maybe it is not easy to tell what photo was refused or a refused change name, but it would be nice to know what was the updated fields (was it about adding or removing a photo, rename the venue).by kpouer
Link to original suggestion: https://www.waze.com/forum/viewtopic.php?f=1525&t=2840456 votesHey!
Thank you very much for this great suggestion.
It was added to our backlog to try and see the possibility to implement it.Please note there is no ETA for it yet.
Best,
Hezi -
Do not move my map somewhere else after an edit
Hi,
when editing from the feed (closing MP, UR), after saving WME moves to a random place where it thinks there are other UR I can solve. It is extremely annoying. When editing I save often because of various save bugs, and as soon as I saved it moves somewhere else and I cannot find where I was editing to finish the job.
Same problem when saving, if Waze thinks there is a problem it moves my map to where it thinks the problem is, and if it is a long road, it happens often that the road is offscreen.…27 votesHey!
Thank you very much for this great suggestion.
As we believe this will be solved with a release of related features, we added to our backlog to track and make sure it was solved.Best,
Hezi -
New Place Address
I'm not sure if it's a minor-bug or intended, but I ask you to take a look:
Issue regarding Map Editor Beta and Production.
:arrow: When you find a new place waiting for approval, if you click on the red arrow everything runs smooth, but if you feel the need to click on the yellow arrow to check what's that place is about before approving it (sometimes you can't tell just by the name title), notice it isn't possible to change the address... well maybe it's ok at this point before approving it.
(attachment 1)
After you Approve you can't…
3 votesHey!
Thank you very much for this great suggestion.
It was added to our backlog to try and see the possibility to implement it.Please note there is no ETA for it yet.
Best,
Hezi
- Don't see your idea?