Map Editor Suggestions
Welcome to the Map Editor's suggestion box!
This is the place to share your ideas for improving the Waze Map editor.
523 results found
-
Enable closure duplication on expired closures
It would be very convenient if you could duplicate an expired closure as you currently can with an active or planned one.
73 votes -
Expand character limit for the name of an MTE
Currently the character limit for the name of an MTE is 25. Common MTE names often come very close or exceed 25 characters, such as "Electric Ave Bridge Replacement" (31 characters). It would be helpful to have the character count increased, possibly by another 10-20 or more.
73 votesGreat timing! We’re currently working on expanding the character limit for the name of an MTE. Keep an eye out for updates on the WME.
-
Add map comments to the "All issues" section
It would be great to have all map comments in one place, and the all issues sections seems perfect for this. Include some filters like comment type (point, area), comment expiration date, comment creator (me, other), etc.
73 votesGreat timing! We’re currently working on it. Keep an eye out for updates on the WME.
-
It would be a great idea if the buttons to show the types of existing roads had the colors of the different types of roads in the WME.
It would be a great idea if the buttons to show the types of existing roads had the colors of the different types of roads in the WME.
72 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Show only active closures
In the layers menu, under closures, there should be an "Only active" option. When this is enabled, only active closures will be shown in the WME. This would make the WME look "cleaner" and uncluttered.
72 votes -
Creating an traffic event from a RTC automatically
Waze wants more traffic events additional to the RTC in order to benefit from the metadata.
Adding a larger amount of traffic events as before needs exceptionally more time and effort.- First, visiting the event tab and creating an event with name, duration etc.
- Adding the respective RTCs with again entering name and duration. 3.Again, going to the event tab and submitting the event.
This is too much work to keep up in general.
So solve this, I suggest the possibility to create an event from the closures tab automatically using the already submitted closure name and duration (as an…
70 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Draw City Boundaries More Accurately
Currently City Boundary layers are not drawn precisely, which can result in the wrong city name being displayed to users in the app. I continue to get URs on this regularly in my area.
This issue seems to be seen commonly when cities are divided by an undulating river. Users should not be shown that they are in a city that they are not in. The system to "draw" the city layer should rely on more data points to draw a more accurate city layer. I will attach screenshots to show this more clearly.https://www.waze.com/en-US/editor?env=usa&lon=-122.59338&lat=49.19848&zoom=2
https://imgur.com/V9kFFp4
Incorrect city "Maple Ridge"…69 votes -
Allow residential places to be moved farther from their "parent" street
Currently, it is generally not possible to create a RPP at, or move an existing one to, a location more than (approximately) 550 m from a segment that has the same street name as the RPP. However, in rural areas of the United States, it is not unheard-of for houses to be located much farther than that from the nearest road. Suggestion: increase the allowed distance for RPPs to at least 1,500 m (no objection if this would require a higher editing level to accomplish than the default R1 for creating an RPP).
66 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Display international and state-level borders in WME
A quality-of-life improvement for WME that would make cross-border editing easier.
66 votes -
Drawing similar type segments
In WME Advanced Preferences, similar to the option to “Draw new roads as two-way,” add an option to be able to change the default Road Type to something other than Street.
Helpful when adding a new highway/freeway or a parking lot where all the segment types are the same, I would like to check a box in the Preferences to either “Draw all segments as [Road Type selection]” or “Default Road Type [selection]”
65 votes -
Seasonal Roads
In almost every climate, there is some time of seasonal weather condition that closes roads at least temporarily during a season.
For example, in the winter, some municipalities will not plow certain roads where the roads are not servicing any addresses. These roads are legally open, but may not be passable by most vehicles except during periods of melt or the end of the season melt. In other areas, seasonal rains or snowmelt mean that dirt roads are impassible to most vehicles several days at a time due to mud, but are usable in drier spells during that season. Because…
65 votesGreat timing! We’re currently working on your suggestion about avoiding seasonal roads. Keep an eye out for updates on the WME.
-
Reopen Update Request
A key could be added, available for a certain period of time from the closing of the UR (e.g. 1d, 6h, 30min), to be able to reopen it and change its status, it is useful when a UR is closed by mistake (if the key is displayed for a few minutes after closing) or if the user replies or adds details after closing (if viewed for a few hours after closing)
The button could only be made visible to those who commented on that issue first or otherwise participated in the conversation.63 votes -
combine Lane guidance segments
With the newly implemented Lane guidance we see new problems rising up.
In belgium, beeing densly populated, we somtimes have several entry's or exits of the highway following up on each other very closely.
sometimes even as close as 20-50 meters.I would like to have a sort of junction box type of tool to combine 2 lange guidance segments.
for example:
2 highway exits within 50 meters. I want the Lane guidance before the first exit to allready show in what lane I have to stay if I have to take the 2nd exit.It's kind of hard to…
62 votesHey,
Thank you for this suggestion.
We have added it to our back log. It will take some time. But it will be be solved as part of JB revamp.Thanks
-
Invert PUR Filter by type
With the latest release of WME, we can now filter place update requests (PURs) by type. There should be an option to invert the filter. By doing this, I can select one type of PUR and show everything except that type.
60 votesGreat timing! We’re currently working on the option to invert the filter. Keep an eye out for updates on the WME.
-
Particular and recurring restrictions
Sometimes I faced uncommon recurring restrictions to be applied on a segment, for example:
- every first sunday of every month;
- every third thursday of even months;
- every last saturday of every month.There is NO WAY to do it automatically in WME, because the editor is unable to know which is the first occurrence of sunday every month and so on, meaning I have to edit those restrictions manually, and I will for sure forget about them.
Developing a built-in tool for these particular cases could be globally very useful.
58 votes -
Have an option to see the year of the Satellital Image shown in the WME
Always shows the actual year but not the year when was taken that Sat Image. Will be really helpful to know that.
57 votes -
Ability to select long stretches of road
A feature that would allow defining a start and an end point and which would automatically select the road between them would be very helpful. There is somtimes a need to select a length of road in the tens or even hundreds of kilometres. (The alt-click trick doesn't work for such long distances.)
Two use case examples:
1) RTC on long stretch of highway
There have been several highway closures due to winter storms recently. Selecting the entire road to be closed requires lots of panning and selecting individual segments, which is very time-consuming.
2) Making changes to long stretches…
56 votesGreat timing! We’re currently working on being able to select long streches of road. Keep an eye out for updates on the WME.
-
Opening hours, by appointment only
Looks useful to me to add the option 'By appointment only' to 'Opening hours' in WME. You still need to choose the days on which an appointment can be made. It is important that the telephone number is stated correctly in the data.
55 votes -
Timed reminder for MCs
Would like to be able to add a reminder based on date/time on an MC. Good for reminder to check on construction or to check for updated aerials, etc. Perhaps allow for both author and subscribers.
54 votes -
The option to turn off certain items in map display, like schools, libraries, parks, etc.
As the subject says, it would be nice if we could un-clutter the display by having the ability to turn OFF certain items on the map display like schools, churches, libraries, parks, etc.
53 votesThanks for the suggestion!
As we are currently moving forward with adding this for natural features, we'd like to implement that first, and then check back to see if this is still relevant after that feature is live.
- Don't see your idea?