Map Editor Suggestions
Welcome to the Map Editor's suggestion box!
This is the place to share your ideas for improving the Waze Map editor.
1140 results found
-
Lines on sections of roads with roundabouts!
We urgently need to implement the ability to add lanes on sections of roads with roundabouts!
There are many sections of roads with roundabouts that use multi-lane and different traffic lanes.
This functionality is severely lacking.70 votes -
Creating an traffic event from a RTC automatically
Waze wants more traffic events additional to the RTC in order to benefit from the metadata.
Adding a larger amount of traffic events as before needs exceptionally more time and effort.- First, visiting the event tab and creating an event with name, duration etc.
- Adding the respective RTCs with again entering name and duration. 3.Again, going to the event tab and submitting the event.
This is too much work to keep up in general.
So solve this, I suggest the possibility to create an event from the closures tab automatically using the already submitted closure name and duration (as an…
70 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Select entire street also by any of its alternative names
In some cases, it would be helpful to select an entire street not by its main name, but by one of the alternative names that it may have.
For instance, here in Portugal we have a big mountain area where it is needed to apply recurrent road closures due to bad weather (heavy snow). Because road closures are carried out by the authorities in perfectly delimited areas, the Portuguese community decided to put exactly the same name on ALL roads of a same area, even if the real street name is a different one. By doing this, the option ‘Select…
70 votes -
Draw City Boundaries More Accurately
Currently City Boundary layers are not drawn precisely, which can result in the wrong city name being displayed to users in the app. I continue to get URs on this regularly in my area.
This issue seems to be seen commonly when cities are divided by an undulating river. Users should not be shown that they are in a city that they are not in. The system to "draw" the city layer should rely on more data points to draw a more accurate city layer. I will attach screenshots to show this more clearly.https://www.waze.com/en-US/editor?env=usa&lon=-122.59338&lat=49.19848&zoom=2
https://imgur.com/V9kFFp4
Incorrect city "Maple Ridge"…69 votes -
Make Map Comments selectable even when behind Area Places
Please allow editors to select Map Comments that located amidst Area Places.
At present, at least in vanilla WME, neither Map Comment points nor areas are selectable if they are amidst an Area Place. The Places layer has to be turned off (or the obstructing place moved or removed) for the Map Comment to be accessible.
Map Comments are among the most useful things for novice editors to view, but such editors may not be aware of the workarounds required to view Map Comments that are amidst Area Places.
69 votesIf we change the order, does it make sense that a place under the map comment won’t be selectable?
-
Support "alternate one ways" as permanent hazards
Allow mapping permanent "alternate one ways" as permanent hazards.
Alternate one ways are two-way roads that are not wide enough for two vehicles to transit in opposite directions at the same time.
In Europe, they are the road section within a square blue sign with two arrows (this side has the right of way) and a white circle with 2 arrows with a red border (this way must give way if someone is already transiting from the other direction).
68 votesGreat timing! We’re currently working on the option to map alternate one ways as permanent hazard. Keep an eye out for updates on the WME.
-
URs should show anonymized but user-unique handle for reporter
The current 100% anonymity of UR reporters makes it impossible for editors to detect reporting patterns of specific Wazers. If URs showed a fully anonymized but user-unique handle for the reporter, editors could identify problematic or abusive patterns. This would save editors time and energy, and allow them easily to report such patterns to community leadership or to Waze for potential action.
Specifically, editors have long suspected that certain Wazers may: (1) repeatedly flag an issue, or a kind of issue, on which they refuse to accept the editing community's past analysis; (2) submit multiple URs for no clear reason,…
68 votesThank you to all who submitted and voted for this suggestion, however it is currently not planned due to PII issues associated with tracking URs in this manner. Please make sure to include the UR ID when reporting abusers on the map so that Staff can properly track the case. Often times we are unable to investigate due to no longer having the UR ID once the UR is closed and deleted.
-
Display international and state-level borders in WME
A quality-of-life improvement for WME that would make cross-border editing easier.
66 votes -
Allow residential places to be moved farther from their "parent" street
Currently, it is generally not possible to create a RPP at, or move an existing one to, a location more than (approximately) 550 m from a segment that has the same street name as the RPP. However, in rural areas of the United States, it is not unheard-of for houses to be located much farther than that from the nearest road. Suggestion: increase the allowed distance for RPPs to at least 1,500 m (no objection if this would require a higher editing level to accomplish than the default R1 for creating an RPP).
66 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Drawing similar type segments
In WME Advanced Preferences, similar to the option to “Draw new roads as two-way,” add an option to be able to change the default Road Type to something other than Street.
Helpful when adding a new highway/freeway or a parking lot where all the segment types are the same, I would like to check a box in the Preferences to either “Draw all segments as [Road Type selection]” or “Default Road Type [selection]”
65 votes -
Seasonal Roads
In almost every climate, there is some time of seasonal weather condition that closes roads at least temporarily during a season.
For example, in the winter, some municipalities will not plow certain roads where the roads are not servicing any addresses. These roads are legally open, but may not be passable by most vehicles except during periods of melt or the end of the season melt. In other areas, seasonal rains or snowmelt mean that dirt roads are impassible to most vehicles several days at a time due to mud, but are usable in drier spells during that season. Because…
65 votesGreat timing! We’re currently working on your suggestion about avoiding seasonal roads. Keep an eye out for updates on the WME.
-
Reopen Update Request
A key could be added, available for a certain period of time from the closing of the UR (e.g. 1d, 6h, 30min), to be able to reopen it and change its status, it is useful when a UR is closed by mistake (if the key is displayed for a few minutes after closing) or if the user replies or adds details after closing (if viewed for a few hours after closing)
The button could only be made visible to those who commented on that issue first or otherwise participated in the conversation.63 votes -
Add function to upload Point of Interest (POI) and Speed Camera databases
An easier editor should be available to upload bulk CSV data of POI and Speed Camera databases, instead of updating and marking one by one. This would help smaller communities get up to speed with Waze updates.
63 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
combine Lane guidance segments
With the newly implemented Lane guidance we see new problems rising up.
In belgium, beeing densly populated, we somtimes have several entry's or exits of the highway following up on each other very closely.
sometimes even as close as 20-50 meters.I would like to have a sort of junction box type of tool to combine 2 lange guidance segments.
for example:
2 highway exits within 50 meters. I want the Lane guidance before the first exit to allready show in what lane I have to stay if I have to take the 2nd exit.It's kind of hard to…
62 votesHey,
Thank you for this suggestion.
We have added it to our back log. It will take some time. But it will be be solved as part of JB revamp.Thanks
-
Invert PUR Filter by type
With the latest release of WME, we can now filter place update requests (PURs) by type. There should be an option to invert the filter. By doing this, I can select one type of PUR and show everything except that type.
60 votesGreat timing! We’re currently working on the option to invert the filter. Keep an eye out for updates on the WME.
-
Restrictions feature (TBR): Limit access by editor level
The restrictions tool used to be simpler a few years ago. Today it allows to setup not only time/days restrictions but also permits/passes, number of passengers, toll roads and more. With new options such as "allowed", "toll free" and "prohibited" it became confusing even for higher rank editors sometimes.
I've lost count of how many times I checked editors that made 1-2 edits and that added a 24/24h 7/7d permanent restriction on what should be a simple "private road". Or even setup a freeway pass on a simple street.
This tool has become extremely complex and powerful, especially since routing…
59 votes -
Particular and recurring restrictions
Sometimes I faced uncommon recurring restrictions to be applied on a segment, for example:
- every first sunday of every month;
- every third thursday of even months;
- every last saturday of every month.There is NO WAY to do it automatically in WME, because the editor is unable to know which is the first occurrence of sunday every month and so on, meaning I have to edit those restrictions manually, and I will for sure forget about them.
Developing a built-in tool for these particular cases could be globally very useful.
58 votes -
Ability to select long stretches of road
A feature that would allow defining a start and an end point and which would automatically select the road between them would be very helpful. There is somtimes a need to select a length of road in the tens or even hundreds of kilometres. (The alt-click trick doesn't work for such long distances.)
Two use case examples:
1) RTC on long stretch of highway
There have been several highway closures due to winter storms recently. Selecting the entire road to be closed requires lots of panning and selecting individual segments, which is very time-consuming.
2) Making changes to long stretches…
56 votesGreat timing! We’re currently working on being able to select long streches of road. Keep an eye out for updates on the WME.
-
Opening hours, by appointment only
Looks useful to me to add the option 'By appointment only' to 'Opening hours' in WME. You still need to choose the days on which an appointment can be made. It is important that the telephone number is stated correctly in the data.
55 votes -
Have an option to see the year of the Satellital Image shown in the WME
Always shows the actual year but not the year when was taken that Sat Image. Will be really helpful to know that.
54 votes
- Don't see your idea?