Map Editor Suggestions
Welcome to the Map Editor's suggestion box!
This is the place to share your ideas for improving the Waze Map editor.
55 results found
-
Parking lot type (motorcycles-only, cars-only, both)
It's very common, at least in Colombia, parking lots only for motorcycles and it's really dissapointing to arrive at a parking lot suggested by Waze, and realize that it's a motorcycle-only parking lot and you're driving a car.
Please add a new property in WME to choose the type of parking lot: motorcycles-only, cars-only, or both, and add a new feature in app to filter by parking lot type.54 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
House numbers for villages with no street names
There are many places where there are no street names - it's just "City name - number" as the address.
130 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Recategorizing UR's when solving
Add a feature to WME to recategorize the Solved UR's when closing those. This would give Waze a true insight of what reports are really needed and vice versa, what are rare and could actually just be within General Error category etc. Based on my research of all Solved UR's in Finland for last 3 months only about 50% were in right category.
In my opinion this would help to reduce and refocus UR categories to better match with reality which in turn helps users when they are reporting meaning less UR's with wrong category -> Better data and better…
42 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
New Permanent hazard: Check-point
In many countries, fixed check-points are installed on the road. It could be done by Police, Customs, Tax services, Weight check... and even borders.
It would be great to have those marqued on the map as permanent Hazard " Check point". It has basically the same effect of a toll booth: You often need to stop there, or a least drive through at a very reduced speed.
This would be a great safety enhancement for both drivers and those manning those check points.
25 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Junction box, add ability to demand a pass or mark as private for specific route
Junction box is still evolving so it would be good to add one more feature to it. We have situations where driving through a longer section of road is only permitted with certain conditions but driving to an address in between or to drive across the affected street from different direction is always allowed.
Thinking about a possibility that those conditions could be set as a pass and then apply it only to specific route in junction box. This could probably also be used in a way that you could set a specific route to be private road in routing,…
37 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Event based restrictions
Sometimes for major events and after major emergencies (wildfires, hurricanes, flooding) there are roads that are open to residents but not to the general public.
I would suggest something that can be applied like a real time closure, but acts more like setting the road to private so it allows routing onto the segment but not through the segment.
This may be related to Permanent Hazards instead, but however it is implemented it should not require a tile update.
35 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Show stop points in the House Numbers layer
The House Numbers layer currently displays only the location of the HN, but not the stop point on the related segment. In HN editing mode, when you select the HN, the stop point also becomes visible, with a dotted line from the HN to the stop point. Suggestion is to display the stop point and the dotted line as part of the House Numbers layer, even when not in HN editing mode. (This might either be visible only at a high-enough zoom level, such as 18, or be an option that the user could enable from the layers menu.)
36 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Extra click required for approving a PUR
When approving/rejecting a PUR (new place, new photo, change in details), an extra click is now needed to close the window. Simply clicking approve/reject would close the window, but now you also have to click done to close the window. This wasn't the case until WME v2.109 (released August 2022)
Screen capture (approving a new place): https://www.dropbox.com/s/v5r8lfe1afe7s5j/purnew.gif?dl=0
Screen capture (rejecting a new photo): https://www.dropbox.com/s/j6o4anmu6afxay8/purphoto.gif?dl=080 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Change Forum Sharing Options object types posted in forum
Currently when an editor uses the Forum Sharing Option to request an unlock, the request ALWAYS says "I would like to be able to edit the following segment(s)." no matter what type of object is selected.
The request should be automatically based on type of object selected
If segment(s) selected, no change
If venue(s) selected, the request should say "I would like to be able to edit the following venue(s)."
If they have any other type of object selected, the request should say "I would like to be able to edit the following [selected object type]."85 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Use RTC history to create new RTC on the same segments
It would be very convenient to be able to re-create a RTC based on the RTC history for one or more segments. This would also require being able to choose to select all segments that were included in the original RTC, as well as optionally proposing start / end times.
Two use case examples:
1) Recurring RTCs where the schedule is not known far in advance
For example, there is nightly road construction on a given highway, but this may not repeat every night for various reasons. The actual closure is only published a few hours before, and so requires…
78 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
It would be a great idea if the buttons to show the types of existing roads had the colors of the different types of roads in the WME.
It would be a great idea if the buttons to show the types of existing roads had the colors of the different types of roads in the WME.
72 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Make RPPs a bright pink
Change the colour of the RPP from a camouflaged dusky pink (same shade used to literally camouflage reconnaissance Spitfires in WWII) to a bright pink like #fa0584 to make it more visible in urban backgrounds.
30 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Put the House number field before the Street field
In some countries, House number needs to be before Street. Maybe this can be customisable by country? If not, I believe it's more logical to have House number first (smaller to larger).
126 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Disable segment geometry changes in House Number mode
When in the "Edit House Numbers" mode, the Editor allows changes to segment geometry, but then generates an error when saving the changes. It is very easy to unknowingly edit segment geometry when trying to move a house number stop point. When this occurs, any HNs edited after that geometry change need reverted.
Please disable segment geometry changes when in HN mode.
42 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
No feedback provided if permalink is unable to select items
Currently there is no feedback given if one or more items are not selected when opening a permalink (i.e segments, places, URs, etc.).
For instance, I have a document with PLs of segments that are always closed during events (such as stadiums). If a segment ID is changed and therefore no longer linked in the PL, I have no way of easily knowing this.
Please consider providing some sort of warning if WME is unable to locate all the linked items.
39 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Place Hours: Sunrise to Sunset
When adding Places, especially outdoor places (such as parks, playgrounds, beaches, etc), there are often posted hours saying the Place is open only sunrise to sunset, or conversely that the Place is closed sunset to sunrise. Unfortunately, the existing Place hours interface doesn't allow for these kinds of hours, only HH:mm times. As sunrise and sunset times change constantly, and in some places drastically due to orbital motion of the earth and time changes due to daylight savings times, it is impractical to estimate open/closing times using HH:mm formats.
It would be beneficial to both app users and map editors…
204 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Temporary downgrade of own editor level
I’d like to suggest in the WME a switch (perhaps in the user control panel) for downgrading the own editor level.
For example:
If I’m a level 5 Editor, but only want to edit simple streets which are only on level 1, i can switch my own editor level to something lower than 5 for this action. This would prevent myself for accidental editing more important street e.g. highways.
Compare this with an account in the IT… Even if I am an administrator… I shouldn’t be logged in always as an admin but just as a normal user with rights…21 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Notification in WME for tile build delay
If there is a delay in the tile build or the map is rolled back for some reason, please show a notification in the WME.
26 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Sub-cities
The goal is to have a mechanism for attaching localities or hamlets to a city.
The French wiki presents a number of situations (https://wazeopedia.waze.com/wiki/France/Routes_Nommage).
There is also the management of districts or neighborhoods of large cities that could also benefit from this feature.92 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Allow 3 choices for PURs that report closed places. 1) Ignore; 2) edit place 3) delete place
Currently we can only ignore a PUR that reports a place closed or delete the closed place. We have no other choices available. Often, we need to make changes in operating hours or make other changes but NOT delete the place. If we ignore the PUR, it counts against the reporter. We need a third choice that gives the reporter credit for the report but allows us to keep the place and make appropriate changes to it.
118 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
- Don't see your idea?