Map Editor Suggestions
Welcome to the Map Editor's suggestion box!
This is the place to share your ideas for improving the Waze Map editor.
1618 results found
-
Differentiate Visiting Helpers/Raiders from True Area Managers
Please differentiate between visiting helpers/raiders and true Area Managers. At present, temporary map raiders and other visiting helpers are typically provided with editable area by granting them "Area Manager" status. As a result, community tools do not distinguish between visiting helpers and dedicated local managers. This can confuse editors, particularly beginners and visitors, who want to identify a true Area Manager for a region in order to open a conversation on local issues. It may also demoralize true Area Managers when the same status they worked hard for, and feel proud to have been granted, appears to be granted with…
12 votes -
Temporary Construction Zone Restriction
Per conversation on the editors discord, it would be nice to have a black and orange dashed line which would indicate construction zones in Waze. This way drivers would get an alert and know to slow down if there are any speed restrictions. In the WME app, users would be able to set these temporary restrictions up to what is allowed per their level. This would be done through restrictions field in the editor. A tab would be added in the restrictions editor to show construction zone information. For a user to set a construction zone on a segment or…
12 votes -
Option to avoid/allow tolls for current trip only (instead of having to dig in settings)
I'll describe the use-case with an example:
User selects a route without Tolls
Route gets recalculated (wrong turn/closure/traffic/preference)
New route includes Tolls
There are 2 workarounds currently. Either check the route repeatedly and make sure the route is indeed avoiding tolls, or go into settings and enable the avoid tolls toggle (and remember to disable after the trip).My suggestion is to avoid tolls for the current trip only (or allow if the toggle is on the other position).
Happy to hear your feedback and discuss.
12 votes -
Real Speed in WME
It would be nice if one could specify the real speed in WME. The official speed limit is sometimes much higher than the real speed one can drive on certain roads (road condition, etc). Having these too high speeds results in incorrect route calculations. One could say that the algorithm should fix this, but that doesn’t seem to happen and one gets slower routes offered, based on incorrect info. Tools from the competition offer an option to enter real speeds.
12 votes -
Enable closure layer button on MTE tab
Major Traffic Events don't show in the MTE tab when the closure layer is switched off. Similar to the closure tab on segments, please add a button to enable the closure layer on the MTE tab.
12 votes -
Displaying of node closures on planned closures
Node closures are great, but they can cause confusion as well. If there are road works with several phases you cannot see if the node closure is on the active closure or on the planned closure.
Therefore I suggest to make node closures greyed out on planned closures, as you now have with the symbol for segment closures as well. Additionally or alternatively, active node closures can be made red/white instead of black/white.
12 votes -
New categories - apartment complex/building
Add a new category for "apartment complex" that'd include multi-building condos and coops. The "apartment building" category would be for single-building condo or co-op companies.
12 votes -
Provide helpful suggestions when showing a save error
When you display a save error in WME, please give us helpful suggestions on how to resolve the issue, not just a generic "check and try again." Check what? What are we looking for? How do we fix it? What is "modifying GuidanceMode? What are CS Lanes? Saying "Check and try again" doesn't help.
Example:
Modifying GuidanceMode is allowed only for CS Lanes
Suggestion: Check and try again12 votes -
"Show on map" in UR should zoom in to UR itself, not to its route
It happens rather often: when I open a UR and click "Show on map", WME zooms in, but the UR isn't visible. I need to zoom out 1-2 levels in order to see the UR and then zoom in to it manually.
I guess, the algorithm of WME calculates the "Show on map" point basing on the user's route. But the user saw the problem in the point of the report, so WME should zoom in to it.
12 votes -
Import a customer address list to route management
the possibility of adding a list of addresses via csv and using them to optimize the route that the delivery man must follow to deliver the products would be useful
12 votes -
Address announcement
When you arrive at your destination have the app say “you have arrived at 12 thirteen st” or something similar. I use Waze through another scheduling app and I always have to check the other app to see what the street number is that I’m actually navigating to
12 votes -
Time-based restrictions with annual repetition.
We should be able to place traffic restrictions on a segment, for example in the summer (June 1st to September 30th).
As the 1 has already passed, we can only place it from today (June 22) and we can only correct it to be correct for the next year after September.
In this case, it should be possible to insert the total (correct) date of the restriction.
12 votes -
Use Paths or Restricted Areas to create drive through restriction
Amount of residential areas where drive through is forbidden is increasing everywhere. I was wondering could either Paths or Restricted areas have an extra setting "Not allowed to drive through" and by setting it router would prohibit such routes. Paths would work on smaller areas but in bigger ones would have to be set with Restricted area.
12 votes -
A better separation between different road types in the layers panel
When working on complex junctions, tunnels, train tracks, and pedestrians, and when all of them are in the same area, the map becomes a real mess and is hard to work with. I suggest adding additional layers to toggle off the visibility of road types and a layer to hide tunnels (or change their transparency at least and make them unselectable and disable snapping).
Take a look at this picture, and you'll immediately understand the issue.
https://i.ibb.co/NFs8jQx/image.png12 votes -
Move RRC and Camera layers to hang under Permanent Hazards
With the introduction of Permanent Hazards Railroad crossings and Cameras have been moved into the Permanent Hazard menu. It would now make (a lot of) sense to also apply this to the chart layers, to prevent people from wondering why railroad crossings or cameras are greyed out in the menu while they do have the permanent hazard layers checked on. It should be similar to how the Places layer has been restructured.
Unless it will be merged into the hazards layer of course, then this is redundant.
12 votes -
Why did you get rid of the 'animals' on the side of the road?
Why did you get rid of the 'animals' on the side of the road? I now have to alert people about deer, etc by clicking on the general 'hazard'
12 votes -
Road shields, ability to add different sign as override to the major one used for that street name
In Finland, we currently have named roads as "180 - Saaristotie" etc. and would like to get rid of the number in street name and just leave the shield. But that is not possible because we have quite a few locations where road number changes while road name stays the same. Another problem is when road category changes to minor road so that the number drops off completely.
So there is a need for feature where you could set an override shield to selected segments while the default sign for that road name stays active on other segments.
12 votes -
Suggestions for seeing the number of users who viewed our profile on WME
As in the waze discuss profile we can see how many people have seen our profile
Can something similar be implemented in our profile on the Waze Map Editor https://www.waze.com/user/editor/user
so we can see how many of our wme profiles have been viewed by users
thank you
12 votes -
WME External providers marked as Permanent closed as a Places Problem
Many Places in Waze have a External providers marked as Permanent closed, and action needed to either remove it (if the places are permanently closed) or remove the problematic External providers link( if the places are active but the External providers link are marked as permanent closed).
However, we as an editor are no ways to know if the External providers link are still active nor it is marked as permanent closed.
So. can we have WME to detect those External providers link and trigger a places problems (something like map problems) for editors to check and fix the problematic…12 votes -
House Number Mode Delete/Trashcan
With the new House Number editing mode, with the segment selected and actively editing house numbers, using the trashcan removes the segment and not the house number.
If I'm editing house numbers, the house number I have selected should be the object deleted. This is not a consistent behavior across WME.
12 votes
- Don't see your idea?