1560 results found

1. Inclusão de Semáforos, sem ou radar de velocidade.

   I propose the implementation of marking all traffic lights, even those without speed radar, in the Waze app’s mapping system. This feature aims to enhance the navigation experience, provide greater driver safety, and enable more accurate and efficient routes.

   Including traffic lights on the Waze map would allow:

   1. Greater Accuracy in Route Time Calculation: By accounting for waiting times at traffic lights, Waze’s algorithm could offer more precise route estimates, preventing unexpected delays for users.

   2. Suggestion of Faster and Safer Routes: With the location of traffic lights known, Waze could suggest alternative routes, avoiding intersections that require longer waiting times and catering to users’ preference for faster routes.

   3. Easier Navigation in Urban and Unfamiliar Areas: Marking traffic lights would aid drivers navigating unfamiliar areas, enhancing safety by providing alerts about controlled intersections and allowing drivers to prepare for stops.

   4. Fuel Consumption Optimization and Emissions Reduction: This feature would enable users to opt for routes with fewer traffic lights, reducing the number of stops and starts, positively impacting fuel consumption and emissions reduction.

   5. Reduction of Accidents and Traffic Violations: Notifications of approaching traffic lights help prevent red-light running and increase driver alertness in intersection areas, contributing to road safety.

   6. Average Waiting Time Indication at Traffic Lights
      
      Description: Beyond marking the location of traffic lights, Waze could display the average waiting time at each traffic light based on historical and real-time data, alerting drivers to intersections that cause significant delays.
      
      Benefits: This feature allows drivers to anticipate waiting times, adjusting their route or speed according to the wait time, thus improving trip planning.

   7. Alerts for Traffic Light Timing Changes Based on Time of Day
      
      Description: Many traffic lights adjust the green/red light duration based on the time of day. Waze could integrate these variations and provide alerts for timing changes during specific periods, such as peak hours.
      
      Benefits: Drivers are informed about waiting time changes, which increases the accuracy of arrival estimates and improves route selection during high-traffic times.

   8. “Green Wave” Notifications for Synchronized Traffic Lights
      
      Description: In locations where traffic lights are synchronized to form a “green wave” (a sequence of green lights), Waze could indicate this possibility, recommending an ideal speed for drivers to pass through several intersections without stopping.
      
      Benefits: This increases trip fluidity, avoiding unnecessary stops and contributing to more economical and less interrupted driving.

   9. Alerts for Traffic Lights with a Record of Accidents
      Description: Some traffic lights are in areas with high accident rates. Waze could highlight these points with caution alerts when approaching traffic lights known for incidents, even suggesting a safe approach speed.
      
      Benefits: This feature enhances road safety by alerting drivers in higher-risk areas and encouraging more cautious driving.

   10. Integration of Traffic Light Information with Driving Assistants in Smart Cars
       
       Description: For vehicles equipped with driving assistants, Waze could share information about the location and status of traffic lights, allowing the car to adjust speed and plan stops more precisely.
       
       Benefits: Integration with smart vehicles increases safety and driving efficiency, especially in urban areas with frequent stops.

   11. Optimized Route Studies for Traffic Lights at Off-Peak Hours
       
       Description: With traffic light data on the map, Waze could suggest optimized routes during late night or low-traffic times, avoiding intersections with slow traffic lights and proposing more direct paths.
       
       Benefits: Reduces travel time and fuel consumption during low-traffic hours, providing users with a quick and smooth navigation experience.

   12. Approach Notifications for Hidden Traffic Lights (Curves, Hills)
       Description: In areas where traffic light visibility is reduced (such as after a sharp curve or on an uphill road), Waze could issue visual and sound alerts in advance, preparing drivers to stop.
       
       Benefits: Increases safety in low-visibility areas, helping drivers avoid sudden braking and risky situations.

   13. Indication of Priority Lanes at Controlled Intersections
       Description: At intersections where there are specific priority lanes (such as left-turn lanes or bus-only lanes), Waze could display these indications, helping drivers position themselves correctly in advance.
       
       Benefits: Improves traffic flow by avoiding last-minute lane changes and helps drivers follow road markings correctly, reducing the risk of violations.

   Map updates can be carried out through collaborative information from Waze map editors, as well as government data on traffic light locations. I also suggest the option of customizing alerts, allowing users to choose whether to receive notifications when approaching traffic lights according to their preference.

   The implementation of traffic light markings on Waze is an innovative proposal, with the potential to improve the precision, safety, and efficiency of navigation. This feature, by adding a new layer of relevant information for users, could elevate the quality of service and make Waze an even more complete tool for urban mobility.

   agsillva

   I propose the implementation of marking all traffic lights, even those without speed radar, in the Waze app’s mapping system. This feature aims to enhance the navigation experience, provide greater driver safety, and enable more accurate and efficient routes.

   Including traffic lights on the Waze map would allow:

   1. Greater Accuracy in Route Time Calculation: By accounting for waiting times at traffic lights, Waze’s algorithm could offer more precise route estimates, preventing unexpected delays for users.

   2. Suggestion of Faster and Safer Routes: With the location of traffic lights known, Waze could suggest alternative routes, avoiding intersections that require longer waiting times… more

   9 votes

   Vote 0 votes Vote Vote

   Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   1 vote 2 votes 3 votes Remove votes

   You have left! (?) (thinking…)
   1 comment  ·  General  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

2. Dead End Signs

   Very important to have a dead end sign on the map before heading down that street, since many times waze will recommend certain roads even though it’s a dead end. Hope this was helpful and becomes a feature. Thank you.

   9 votes

   Vote 0 votes Vote Vote

   Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   1 vote 2 votes 3 votes Remove votes

   You have left! (?) (thinking…)
   0 comments  ·  General  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

3. Link Google place to a residential place in Waze

   Many addresses in the Google Maps are marked far away from real locations, and it badly affects user experience in Waze. Today we only can link such wrong addresses to public places in WME. It will be more reasonable to allow linking them to residential places.

   9 votes

   Vote 0 votes Vote Vote

   Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   1 vote 2 votes 3 votes Remove votes

   You have left! (?) (thinking…)
   0 comments  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

4. Possibility for editors to create map update requests, for changes that need higher level editors.

   Many times I can see needed changes or map problems that are prohibited for my level to edit or fix. But there is no option to report these issues to the higher levels, inside the map editor.
   Should I have to drive there and create a map issue report?

   9 votes

   Vote 0 votes Vote Vote

   Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   1 vote 2 votes 3 votes Remove votes

   You have left! (?) (thinking…)
   0 comments  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

5. Add an Weather events

   add the Weather events for giving an warning if someone passed the extreme weather

   9 votes

   Vote 0 votes Vote Vote

   Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   1 vote 2 votes 3 votes Remove votes

   You have left! (?) (thinking…)
   0 comments  ·  dashboard  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

6. Excluding Specific Road Types in Polygons Based Events

   I would like to propose an improvement to the "Polygons Based Events" by adding an option to exclude certain types of roads, similar to the school zone alerts.

   In my case, I want to set up a PBE for major roadworks, but a highway crosses at a lower level and will be notified of this event even though it is not affected.

   9 votes

   Vote 0 votes Vote Vote

   Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   1 vote 2 votes 3 votes Remove votes

   You have left! (?) (thinking…)
   0 comments  ·  General  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

7. Cambiar icono en modo moto

   In Car mode, you can change the icon to another one. But in MOTORCYCLE mode, this is not possible and a very thin motorcycle (2D) appears that blends in with the road and is difficult to see easily when riding a motorcycle.
   You should be able to change to a more visible one, such as the arrow or triangle that stands out more. This way, you will avoid taking your eyes off the road more than necessary.

   9 votes

   Vote 0 votes Vote Vote

   Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   1 vote 2 votes 3 votes Remove votes

   You have left! (?) (thinking…)
   0 comments  ·  dashboard  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

8. Automatically add street when adding a point location

   As a waze level 2 editor, when adding a residential place, I'd like for the street to be automatically pre-filled with the closest segment in the map.

   I have been adding a lot of residential places in my zone and I have to copy the street name and paste in each place I add. This process would be more expedite if street name is filled with the closest segment on the map and would avoid errors of places in streets different than the one they are put into.

   9 votes

   Vote 0 votes Vote Vote

   Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   1 vote 2 votes 3 votes Remove votes

   You have left! (?) (thinking…)
   0 comments  ·  General  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

9. Validation workflow & access to all functions

   Hello,

   I'm a current level 3 Area Manager and every day I have to deal with bottlenecks because I don't have the necessary level to make changes.
   So I have to find a L4 or L5 to do it, explain it to them and get the result.
   This is very time-consuming and somewhat archaic these days.

   I'd like to suggest the following:
   Be able to give all editors access to all functions or perhaps from L2 or L3 if we want there to be a minimum of editing experience. As well as adding a validation workflow for functions that currently require a higher level.

   In my case, this would allow me to make all the changes and, if some of them require a higher level, to submit a validation request to the higher levels.
   It's smoother and simpler.

   For example, I want to add lanes or speed bumps, but today I can't. With this change, I'll be able to add them and submit them, and an L4 or L5 will then have to validate or reject my edit (this system is in place for certain modifications, so why not extend it more widely?)

   Thank you,
   Yves

   Hello,

   I'm a current level 3 Area Manager and every day I have to deal with bottlenecks because I don't have the necessary level to make changes.
   So I have to find a L4 or L5 to do it, explain it to them and get the result.
   This is very time-consuming and somewhat archaic these days.

   I'd like to suggest the following:
   Be able to give all editors access to all functions or perhaps from L2 or L3 if we want there to be a minimum of editing experience. As well as adding a validation workflow for functions that currently… more

   9 votes

   Vote 0 votes Vote Vote

   Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   1 vote 2 votes 3 votes Remove votes

   You have left! (?) (thinking…)
   0 comments  ·  General  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

10. Lane guidance: Make "View Only" and "View and Hear" behaviors consistent for "continue straight" lanes

    In WME we have two options if we want to force "continue" lane guidance to be surfaced to the user - view only, and view and hear (or more recently, with and without audible instructions).

    Aside from the obvious difference in whether or not an audible instruction is issued to "use the Left 3 lanes to continue straight ..." or only a visual instruction, there's another more subtle behavior change that is not always welcome - namely, if you use the "View and Hear" option, it is additionally treated as a "Continue" TIO (turn instruction override). This means that, if View and Hear is chosen, when you are many miles away from the junction in question the "next turn" in the navigation list will be at the point of this junction, rather than the next actual turn, whereas if you choose "view only", you'll get visual LG about a half mile from the junction but otherwise the "next turn" will be where you'd expect it to be, at the next actual turn maneuver or exit you need to take.

    It is my opinion that these two behaviors should be decoupled - we have access to the Continue TIO if we want/need it for a particular junction, duplicating that functionality on the lane guidance is unexpected behavior and should be changed to simply announce the LG at the same location that view only would show it, without silently also duplicating the "continue" TIO behavior which may or may not be desired at a particular junction.

    In WME we have two options if we want to force "continue" lane guidance to be surfaced to the user - view only, and view and hear (or more recently, with and without audible instructions).

    Aside from the obvious difference in whether or not an audible instruction is issued to "use the Left 3 lanes to continue straight ..." or only a visual instruction, there's another more subtle behavior change that is not always welcome - namely, if you use the "View and Hear" option, it is additionally treated as a "Continue" TIO (turn instruction override). This means that, if… more

    9 votes

    Vote 0 votes Vote Vote

    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    1 vote 2 votes 3 votes Remove votes

    You have left! (?) (thinking…)
    0 comments  ·  General  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

11. Better support for Rural map editors

    I live in a VERY rural area. Quite often, I'll be driving but not get EA credit because I didn't have cell service. I can literally drive for 50+mi without any cell coverage. I drove 530 miles two days ago and maybe got credit for half of it.

    I'd like it if map editors would have the ability to turn on some sort of feature in the app that saves their location history until cell service is restored. Also, as I have seen others suggest, a larger EA radius from a given drive would be very helpful out here as I cannot possibly drive every back road around here...

    I live in a VERY rural area. Quite often, I'll be driving but not get EA credit because I didn't have cell service. I can literally drive for 50+mi without any cell coverage. I drove 530 miles two days ago and maybe got credit for half of it.

    I'd like it if map editors would have the ability to turn on some sort of feature in the app that saves their location history until cell service is restored. Also, as I have seen others suggest, a larger EA radius from a given drive would be very helpful out here as… more

    9 votes

    Vote 0 votes Vote Vote

    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    1 vote 2 votes 3 votes Remove votes

    You have left! (?) (thinking…)
    0 comments  ·  General  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

12. Flag Waze Places as closed or moved when are also in Google Maps

    When a Google Maps place is closed or moved and this place is matched with a Waze place, mark this place as a suggestion to review by editor.

    9 votes

    Vote 0 votes Vote Vote

    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    1 vote 2 votes 3 votes Remove votes

    You have left! (?) (thinking…)
    0 comments  ·  General  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

13. Flag Waze Place as closed or moved when this also happens in Google Maps

    When a Google Maps place is closed or moved and this place is matched with a Waze place, mark this place as a suggestion to review by editor.

    9 votes

    Vote 0 votes Vote Vote

    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    1 vote 2 votes 3 votes Remove votes

    You have left! (?) (thinking…)
    0 comments  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

14. When using CarPlay i want using waze on Phone not on CarPlay

    When using CarPlay map don't work on Phone, when off on CarPlay waze, not show me map on phone. I want switch map between CarPlay <> Phone. When i Driving on Taxi and check roud better working on Phone, i can faster zoom in, zoom out on phone and change roud, or check alternative street. When i using Uber on Car Play i want using waze on phone.

    9 votes

    Vote 0 votes Vote Vote

    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    1 vote 2 votes 3 votes Remove votes

    You have left! (?) (thinking…)
    1 comment  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

15. Streamlining changes for adding house numbers

    I'd like to suggest two related changes regarding the addition of house numbers. These are small changes, but in UI design, frictions like this can add up when one is performing the same action over and over.

    1. Always keep the text field active when selecting a house number point

    After clicking to add a house number, the text field to enter the number is automatically active and can be typed in (which is great!) But, when clicking and dragging either the house number itself or the entry point, the cursor goes away, and one has to click the number field again to be able to enter a house number. Even worse, dragging the entry point along the road doesn't work at all, as it deselects the entire house number! To move the entry point, you have to deselect the house number by clicking outside of it, then click on it to reselect it, then click and drag on the entry point.

    The solution to this is to make the text field stay active when the house number is selected, even when dragging either of the points (or have the cursor dissapear momentarily but come back when you release the drag). One should also be able to drag the entry point without it deselecting the house number. That way, the user can perform any of the three actions (moving the house number point, moving the entry point, and editing the number itself) in any order, even more than once, without having to move their mouse around like a maniac.

    As a person with clumsy fingers that uses WME on a laptop, I would say about 30% of my time doing house numbers is spent fixing typos or misclicks. The change seems small, but if you're doing hundreds of house numbers on the same street and having to click three or four times per house number, it gets frustrating very quickly.

    1. When the entry point has been moved already, lock it in place when moving the house number point

    When doing house numbers, I place the point, input the number, and then move the entry point to the correct location. Sometimes, though, I will realize that the house number is misaligned after I do this, and move it to the correct position. The problem is, this resets the position of the entry point, because as the house number moves, the entry point is set to the nearest point on the road.

    I would propose that, if the user has already moved the entry point along the road for a given house number, it should assume it is at the correct location. So, if I go to move the house number itself, the entry point should stay where it is. If the entry point is not moved, however, it should behave as it does now, because it is nice to be able to drag along a house number and have its entry point come with it if I misclicked the location.

    Thank you for your consideration!
    - Catalyzzt

    I'd like to suggest two related changes regarding the addition of house numbers. These are small changes, but in UI design, frictions like this can add up when one is performing the same action over and over.

    1. Always keep the text field active when selecting a house number point

    After clicking to add a house number, the text field to enter the number is automatically active and can be typed in (which is great!) But, when clicking and dragging either the house number itself or the entry point, the cursor goes away, and one has to click the number field… more

    9 votes

    Vote 0 votes Vote Vote

    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    1 vote 2 votes 3 votes Remove votes

    You have left! (?) (thinking…)
    0 comments  ·  General  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

16. WME Notes List

    Should add a tab in the left side panel with a list of all our Notes and those we have answered so we can quickly find them again on the map.

    9 votes

    Vote 0 votes Vote Vote

    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    1 vote 2 votes 3 votes Remove votes

    You have left! (?) (thinking…)
    1 comment  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

17. Please add Japanese "Stop" signs and pedestrian crossings

    In Japan, pedestrians are required to stop at places where there are stop signs and at crosswalks where there are pedestrians about to cross. In addition, pedestrians are required to slow down when crossing a crosswalk where it is unclear whether there are pedestrians about to cross. Violating these rules will result in police crackdowns and penalties such as fines being imposed on drivers. Currently, there are also "stop" cameras installed, but I understand that these are intended to draw attention to crackdown points. Instead, I would like to see signs and indications that there are crosswalks.

    9 votes

    Vote 0 votes Vote Vote

    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    1 vote 2 votes 3 votes Remove votes

    You have left! (?) (thinking…)
    0 comments  ·  General  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

18. be able to add additional waypoints, sites to map out a whole trip

    add additional destinations to a trip.

    9 votes

    Vote 0 votes Vote Vote

    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    1 vote 2 votes 3 votes Remove votes

    You have left! (?) (thinking…)
    0 comments  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

19. Select and edit multiple RPPs

    When you have a street name changed, HN numbers don't need to be modified.
    When you have a street with many RPP, you have to change the street name in each RPP, one by one.
    This is also the argument of some publishers who do not want to use residential

    It should be interesting to be able to select many RPP of the same street (with the control key for exemple or an option on the segment) to be able to change the street name in one time and in each RPP.

    9 votes

    Vote 0 votes Vote Vote

    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    1 vote 2 votes 3 votes Remove votes

    You have left! (?) (thinking…)
    0 comments  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

20. Update links in WME footer - "Get help" and "Editing forum"

    In the footer of WME are two links: "Get help" and "Editing forum", which are out of date.

    • Get help - Redirects to Waze Discuss home page instead of Wazeopedia content on Waze Discuss

    • Editing forum - The link works currently, but it uses the old phpbb forum link instead of Waze Discuss. Update from http://www.waze.com/forum/viewforum.php?f=8 to https://www.waze.com/discuss/c/editors/waze-map-editors-topics/4930

    Low priority fix, I only post this to make my OCD happy.

    9 votes

    Vote 0 votes Vote Vote

    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    1 vote 2 votes 3 votes Remove votes

    You have left! (?) (thinking…)
    0 comments  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating