Map Editor Suggestions
Welcome to the Map Editor's suggestion box!
This is the place to share your ideas for improving the Waze Map editor.
593 results found
-
Improve House Numbers Editing Interface Clarity
Since the version 2.272, the HN interface has become visually overloaded mainly on cross roads. In the previous version, entering house numbers mode would visually isolate the numbers belonging only to the selected street. This behavior was much more intuitive and provided a cleaner, distraction-free environment for editing.
We suggest restoring this functionality - either by default or as an optional toggle - so that only the house numbers from the selected street are shown during editing. This change would significantly improve clarity, reduce errors, and enhance the overall editing experience.
Thank you for your consideration.
98 votes -
More complexity for Residential place point house numbers
More Complexity was adder for House Numbers when using House numbering -feature. However, there is still restrictions when adding Residential place point.
Because It's not possible to use House numbering feature in country side where houses are far away from named road.
" As a WME user I want to add House number format for example 180-7 for residential place, in a case when houses are far away from named road"
282 votes -
Filter GPS tracks by vehicle type: private, taxi, motorcycle
The GPS layer should have checkmarks where we could choose the vehicle type of the GPS tracks we want to see.
This would be great for determining what type of vehicle is using a particular road, which in turn would be useful for deciding what road restrictions a road should have.75 votes -
Replying and closing UR should give editors an edit point
Currently, when you close a User Report (UR), the count of resolved URs increases on the editor profile. However, there is no reward of an edit point.
Editors spend vast amounts of time looking for, investigating, replying and managing the lifecycle of a UR. I propose that both replies to a UR and closing a UR should each give a single edit point.
Given that Waze tracks the number of URs resolved, adding points retrospectively would also be appreciated. Though I understand UR replies couldn't be added retrospectively.
The awarding of these edit points should still be subject to throttling…
70 votes -
Partners polygon layer
Hello,
Thanks to the Waze for Cities program, we are happy to have more and more partners, either for road management (Connected Citizens) or for event management (Global Event Partners).
For those who do not know the details, you should know that a partner benefits from one or more polygons that characterize their rights area (data flows to or from Waze, closures, MTE).
The community being very involved, and always on the lookout for modifications to be made in WME, or closures to be programmed, it often happens that our closures or our editions conflict with their closures.
It is…46 votes -
Expand external visual cue on mouseover
Several years ago the WME interface was changed and it reduced how much information was visible when adding an external provider. You could no longer see the difference between two entries because the text simply isn't visible and longer place names make it worse. Editors would have to select a provider to see the address and determine if it was correct. If it was not, they would have to search again and select another entry. Repeat the process until you find the correct entry. If there is no entry, you have tried five different times to find out. For some…
97 votesGreat timing! We’re currently working on it. Keep an eye out for updates on the WME.
-
ICON Change on RTC for Turns
Currently when you select a segment with an RTC on a turn arrow, you just see the white fence/barricade icon that you see on the node. You then have to hover over the turn arrow, then click on Turn Closures and go to the window that popped up to see if these are active or finished.
I would like to see the icon changed to the the Red Closed symbol when active, like we see on segments when they are actively closed, and then the grey circle we see when they are finished. It would help tremendously in deciding if…
71 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
House number editing no longer shows reason for HN error
With the recently released change to how we edit house numbers, we no longer see information of why there is a problem (wrong side, already exists, etc). This functionality needs to be added back, or the actual error needs to be added to the error message, so we understand what the issue is.
Details were provided in this beta post.
https://www.waze.com/discuss/t/a-faster-way-to-add-house-numbers-in-wme-for-segments/358469/2077 votes -
Warn if adding restrictions (bus, hov, ...) that applies to all lanes
When adding restrictions to segment(s), the default selection in ENTIRE segment (in other words, all lanes).
If, for some reason. the editor misses this setting, the segment will be excluded (by mistake) for navigation for certain vehicles.
For instance, adding BUS lane for all lanes will prevent private cars from using this segment. This would lead to wrong and strange navigations.
For that reason, and especially since, after saving, there is no visual mark in WME for this selection (ENTIRE vs specific lane) it is advised to add a popup warning message for these cases, like the warning message that…45 votes -
House number change history
When selecting a house number the interface no longer shows who last modified the house number. History on the segment doesn't always show what was change (it might show added or deleted, but not moved or edited). Segment history needs to have more detail on what was done.
67 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Segment history - moved house numbers
When looking at segment history, you can see details of house numbers that have been added or removed. When the position of the house number is changed, the history says "House Number: Missing Data". It would be better to list the house number and that it was moved.
42 votes -
Drawing similar type segments
In WME Advanced Preferences, similar to the option to “Draw new roads as two-way,” add an option to be able to change the default Road Type to something other than Street.
Helpful when adding a new highway/freeway or a parking lot where all the segment types are the same, I would like to check a box in the Preferences to either “Draw all segments as [Road Type selection]” or “Default Road Type [selection]”
68 votesGreat timing! We’re currently working on it. Keep an eye out for updates on the WME.
-
Ensure that permanent hazards and cameras are selected before they can be relocated
As shown in the above video, it's far too easy for a PH or camera to be moved accidentally when panning around the map. Hit a PH while panning, and it can be moved half way across the screen.
Please make it so they have to be selected before they're above to be relocated, just like other map elements.
72 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Ability to add more than 4 fields in the Address box
Please give us the ability to create more than 4 address fields. and make it so that editors can set custom number of fields according to their own area.
Right now waze has four boxes for address: Street, City, State, Country.
Not all addresses in the world work quite exactly like this so please
I would like to suggest waze allow users to create custom fields and name them and Country coordinators set the limit of fields in each city and country.
So we can have many fields like:
Street
Sector
Phase
Town
City
District
State
etc.
I tried looking…37 votes -
Disable Permanent Hazards on Non-Driveable Roads and Pedestrian Paths
Disable the ability for permanent hazards to be snapped to and/or placed on non-driveable roads (runway and railroad) and pedestrian paths (routable, non-routable, and stairway) in WME. PHs intended for driveable roads at junctions with these road/path types can be accidentally placed on the incorrect non-driveable segment. While easy to check and correct when placing, this could preemptively prevent mistakes.
130 votes -
Update UR editor reply email
Below is the email Waze currently sends when an editor replies to a UR reporter:
From: Waze Map Editor no-reply@waze.com
Subject: A comment on a map issue you reportedHi <Reporter Username>,
You received a comment on the map issue you reported, from <Date> on <Road Name>, <City> - “<UR Description>”. An editor from the Waze mapping community wants to solve the problem, but needs some more information.
<Editor Username> on <Date/Time>:
<Editor Message>
You can reply using the Waze mobile app, or <URL to UR> in the Waze map editor.
Want to join the map editing community? Here’s how…
92 votesWe plan to work on updating UR editor reply email in the near future.
-
Save all native WME client settings on server side
Base WME client settings are only saved to the local machine, as every time you log in somewhere on a new workstation, you have to go restore your preferences such as Environment, Language, Imperial/Metric, Compact Mode, Transparent Arrows, etc.
However, with the implementation of Issue Tracker, saved filter settings are immediately accessible upon a new login, proving that WME user settings can be saved at the server end.
Please save all native WME settings on the server side so that they are already in place when an existing editor logs in on a new workstation for the first time.
93 votesGreat timing! We're currently working on making your preferences accessible when logging in on a different device. Keep an eye out for updates on the WME.
-
House number layer should disable
With the new house number editing flow, once you edit a house number and leave house number editing, the House Number layer remains active. The layer should return to disabled if it was disabled before editing the house number.
36 votes -
Adding a comment when requesting new aerial images
When L6 editors request up-to-date images for the WME, it would be useful if they could write a comment (for example, for whom they have requested the images) and this comment should also reappear when they get the notification that the new images have been provided.
It could also be helpful to have access to a list or map showing the areas that the new images were requested for so that new images are not requested for the same area by different editors.
48 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Add Driving Restriction option to enable Toll flag for specific date / time / vehicle settings
Driving Restrictions currently has Allowed, Toll Free, Prohibited
But we also need an option to explicitly set Toll EnabledWe have a road that operates as a Toll road for all vehicles 6-9am but then changes to not a Toll road (also for all vehicles) from 9:01am to 5:59am the following day.
We can't use the Toll Free option as there isn't a subset of vehicles that are not charged a Toll during this time period.
Also setting a Toll Free period 9:01 to 5:59 has no impact as the driving restriction is only checked during the hours its active…
50 votesGreat timing! We’re currently working on time-based driving restriction. Keep an eye out for updates on the WME.
- Don't see your idea?