Map Editor Suggestions
Welcome to the Map Editor's suggestion box!
This is the place to share your ideas for improving the Waze Map editor.
1485 results found
-
A better separation between different road types in the layers panel
When working on complex junctions, tunnels, train tracks, and pedestrians, and when all of them are in the same area, the map becomes a real mess and is hard to work with. I suggest adding additional layers to toggle off the visibility of road types and a layer to hide tunnels (or change their transparency at least and make them unselectable and disable snapping).
Take a look at this picture, and you'll immediately understand the issue.
https://i.ibb.co/NFs8jQx/image.png12 votes -
Detour routes
We need the ability to add detour routes (paths) that can be added and removed in real time and/or scheduled to use in conjunction with closures. Often when local authorities announce closures, the also specify preferred detour routes.
12 votes -
Move RRC and Camera layers to hang under Permanent Hazards
With the introduction of Permanent Hazards Railroad crossings and Cameras have been moved into the Permanent Hazard menu. It would now make (a lot of) sense to also apply this to the chart layers, to prevent people from wondering why railroad crossings or cameras are greyed out in the menu while they do have the permanent hazard layers checked on. It should be similar to how the Places layer has been restructured.
Unless it will be merged into the hazards layer of course, then this is redundant.
12 votes -
Road shields, ability to add different sign as override to the major one used for that street name
In Finland, we currently have named roads as "180 - Saaristotie" etc. and would like to get rid of the number in street name and just leave the shield. But that is not possible because we have quite a few locations where road number changes while road name stays the same. Another problem is when road category changes to minor road so that the number drops off completely.
So there is a need for feature where you could set an override shield to selected segments while the default sign for that road name stays active on other segments.
12 votes -
Suggestions for seeing the number of users who viewed our profile on WME
As in the waze discuss profile we can see how many people have seen our profile
Can something similar be implemented in our profile on the Waze Map Editor https://www.waze.com/user/editor/user
so we can see how many of our wme profiles have been viewed by users
thank you
12 votes -
WME External providers marked as Permanent closed as a Places Problem
Many Places in Waze have a External providers marked as Permanent closed, and action needed to either remove it (if the places are permanently closed) or remove the problematic External providers link( if the places are active but the External providers link are marked as permanent closed).
However, we as an editor are no ways to know if the External providers link are still active nor it is marked as permanent closed.
So. can we have WME to detect those External providers link and trigger a places problems (something like map problems) for editors to check and fix the problematic…12 votes -
House Number Mode Delete/Trashcan
With the new House Number editing mode, with the segment selected and actively editing house numbers, using the trashcan removes the segment and not the house number.
If I'm editing house numbers, the house number I have selected should be the object deleted. This is not a consistent behavior across WME.
12 votes -
Support optional "display name" specifically for Area Places
The "name" field of an Area Place serves two completely separate functions. First, it seeks to form, together with the address, a unique search hit; this could involve a lot of text. But second, it displays on the app for everyone nearby.
Most drivers probably don't care about detail in the displayed name; for them, excessive detail may distract rather than help. For example, in some countries editing conventions dictate that rest stops along freeways should have highly detailed primary names in order to make them useful search hits, such as:
"Rest Area (no facilities) - I-680 mile 58 Benicia-Martinez…
12 votes -
Add "Any date after today" for age of new aerial data requests (Request updated imagery)
BLUF Recommend adding an option for “Any date after today” Especially for new construction.
Thank you for adding the Request updated imagery straight from WME to the WME Beta site. It allows one to request imagery that is 1 year, 6 months, 1 month. To improve the process it would be great to add "Any date after today". For construction the new configuration may have occurred within the last month or significant changes were made within the last month (lane guidance painting, etc.
12 votes -
Vehicle Height --> RV
Many RVs are much taller (and wider) than the typical passenger vehicles. Allowing the user to enter the vehicle height (and width) will assist when traveling as many bridges and roads do not accommodate Motorhomes, Large 5th Wheels / Trailers, etc.
12 votes -
Draw Bridge Traffic Controls
My suggestion is Draw Bridge Traffic Control as a Perm Hazzard in WME
Awareness need for Draw Bridge control ahead that could engage their Traffic Light or Swing Arms to stop traffic.
The icon should be different for a Draw Bridge than the usual Traffic Light icon.In more words:
We have RRC and now rolling out Traffic Lights. RRC can be plain, can have Traffic Lights, and can have Swing Arms. Draw Bridge controls pose the same problem. But in this case, they usually have both Traffic Lights and Swing Arms or some other blocks.No difference than a…
12 votes -
Let me create custom routes on the map editor, that can be pushed to my device(s).
I know all the best routes from work to home and vice versa. Let me create those routes in the map editor then "push" or I can "fetch" them to my device(s). Then when I get in my car and open waze and asks if I'm going home or to work the first routes it pulls from are my custom ones, and creates a heat map list or something that I can choose from.
12 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Blocking the APPROVAL or EDITS of a place if the corresponding label is off.
Now that the CREATION of a place if the corresponding label is off is implemented, the same principle should also be applied to APPROVAL or EDITS of those places.
Otherwise we can be adding duplicates to the map
See example:
https://i.imgur.com/dHcAOpE.jpg11 votes -
Improve handling of Routing Option for L1-L3 editors
Editing segments with Routing Preference (or Routing Option) is only possible for L4+ editors.
However, WME Beta and WME Prod allow L1-L3 editors to change segments with Routing set to Unfavored/Preferred (i.e. not Neutral), and only gives a very generic error message when saving. Which is rather unproductive.
My suggestions:
- Can we improve the wording in the error pop-up?
- Can we add a warning similar to the one appearing when users select segments that are part of a Junction Box?Routing Preference: https://i.imgur.com/bH6gxI2.png
Current Error: https://i.imgur.com/o96353Mm.png
JB Warning: https://i.imgur.com/xuRHHoE.png11 votes -
Advertisment Error Handling
Please change Paid Advertisement Handling to have them appear on the Map Editor after they have appeared and allow Editors to submit update requests that Advertisers need to acknowledge. The existing Google forms that are posted in the forum are worthless. I have submitted multiple forms for Kroger Ad issues around greater Columbus, Ohio that do not appear to have any affect. (Also, I have never received feedback on a report filed.) A month later another Ad shows up with the store still located 3 blocks away from its actual location. If the Ad Place appeared in the Editor and…
11 votes -
WME - Allow to put and specify an estimated duration for mobile speed camera
In some countries, there are, in addition to mobile and fix speed cameras, some "almost-fix" speed camera : these speed cameras are placed on the roadside for a period of several days (one or two weeks) before being moved elsewhere for the same duration.
It would be good in WME to provide these types of radars with an estimated duration (and for example to cancel them if there ane any confirmation during a period of 24 hours).
With the present system, police alert are to short and fix camera reported in WME is not the right solution.11 votes -
Please add traffic on map when not navigating so that we can see traffic like Google maps does.
Please add traffic onto map when not navigating so that we can see traffic congestion like Google maps does. I tend to just open Waze for traffic issues and police and hazards when driving to work everyday because I don’t need to navigate to work normally.
11 votes -
Improve comments from other users on Closures and Reports
When other users comments on Closures and Reports I have submitted they show as a pop-up in the app and then disappear, forever! These comments are nowhere to be found. Not in the app inbox, not in my e-mail.
The only way to reply is to find the closure or the report on the map. But for an L5 editor like myself who puts dozens of closures around the country every week, that's useless.
Can you please improve how these comments are handled?
Thanks, Yanis.
11 votes -
Possibility to adjust fuel prices with WME.
More and more gasoline prices are no longer kept up to date by Waze users. To ensure that people in my region can see the current prices at the gas stations, I now enter these via the app. This takes a lot of time. I would like, and many others probably with me, the option to enter these gasoline prices via WME.
11 votes -
WME Planning Mode
When handling new road construction or reconfiguring existing roads, junctions, interchanges, etc. it would be beneficial to have a "planning mode" where the changes could be planned in advance but not added to the live map until the construction is finished. Currently, editors must carefully preserve existing routing while mapping the new segments.
11 votes
- Don't see your idea?