1704 results found

1. € per minute saved for highway route with tolls

   I find myself always going against Waze’s route on my daily commute, because it suggests taking the highway right at the start of the journey, instead of going a bit by the main road until the next city and then joining the highway. This happens because the highway is the fastest route, but the other option is just 4 min extra time in the morning and saves 2 euros in tolls which is half the cost of the journey, if I would take the 100% highway route.
   There could be a feature, where I could say how much 1euro should save me in minutes, could be done with a slider, in the configuration where you chose to avoid tolls or not, and this could be active or not.
   This way I could say than 1 euro needs to save me let’s say 10min, and the algorithm will check if the alternative, the main road, is longer than the minutes x toll cost of the equivalent section.
   Of course this should only happen one time per highway stretch, meaning that it won’t make me leave and join multiple times to the same stretch of highway.

   I find myself always going against Waze’s route on my daily commute, because it suggests taking the highway right at the start of the journey, instead of going a bit by the main road until the next city and then joining the highway. This happens because the highway is the fastest route, but the other option is just 4 min extra time in the morning and saves 2 euros in tolls which is half the cost of the journey, if I would take the 100% highway route.
   There could be a feature, where I could say how much 1euro should… more

   3 votes

   Vote 0 votes Vote Vote

   Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   1 vote 2 votes 3 votes Remove votes

   You have left! (?) (thinking…)
   0 comments  ·  General  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

2. Avoid toll roads

   I have “avoid toll roads” enabled but Waze still includes them. It’d be great if I could “drag” my route and save it as my preferred route.

   3 votes

   Vote 0 votes Vote Vote

   Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   1 vote 2 votes 3 votes Remove votes

   You have left! (?) (thinking…)
   0 comments  ·  General  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

3. separate “Avoid expressways” option

   Please add a separate toggle for avoiding expressways, instead of treating them the same as motorways.
   Today, Avoid highways/motorways skips motorways (in Poland: A roads) but still routes onto expressways (S roads). In many countries these are different classes of road. Motorways are often tolled and fully limited-access. Expressways are usually the main free high-speed network, with different speed limits and rules.
   Suggested options:
   Avoid motorways
   Avoid expressways
   That would let drivers choose, for example, “skip Polish autostrady, but keep drogi ekspresowe such as S1”. Right now this is not possible in Waze. Google Maps folds both into one setting, which is too aggressive for everyday trips.
   A second toggle would also help drivers who want to avoid limited-access dual carriageways without being pushed onto slow local roads.
   Thank you for considering this.

   Please add a separate toggle for avoiding expressways, instead of treating them the same as motorways.
   Today, Avoid highways/motorways skips motorways (in Poland: A roads) but still routes onto expressways (S roads). In many countries these are different classes of road. Motorways are often tolled and fully limited-access. Expressways are usually the main free high-speed network, with different speed limits and rules.
   Suggested options:
   Avoid motorways
   Avoid expressways
   That would let drivers choose, for example, “skip Polish autostrady, but keep drogi ekspresowe such as S1”. Right now this is not possible in Waze. Google Maps folds both into one setting,… more

   3 votes

   Vote 0 votes Vote Vote

   Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   1 vote 2 votes 3 votes Remove votes

   You have left! (?) (thinking…)
   0 comments  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

4. Add sublayers to Task layer

   Please add sublayers to the Task chart layer in WME, just loike there are for almost all other chart layers. Besides bringing it in line with other layers, it will also save editors click, because instead of going all the way to filtering in the Review menu, they can just simply flick it off in the layers menu.

   It would look something like this: https://i.postimg.cc/BvpqBXQk/Task-layers.png

   3 votes

   Vote 0 votes Vote Vote

   Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   1 vote 2 votes 3 votes Remove votes

   You have left! (?) (thinking…)
   0 comments  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

5. Warn editors before hitting the daily proposal limit instead of failing on save

   Currently, Level 1 editors are limited to submitting 10 edit proposals per day. However, the editor UI does not indicate when this daily quota has been exhausted.

   As a result, an editor can continue selecting locked segments, making extensive adjustments, and editing attributes—only to receive an error ("Editors are only allowed 10 proposals per day") when finally attempting to save. All of that un-submittable work is then essentially lost or blocked.

   Suggested improvements:

   • Visible Counter / Indicator: Display a counter in the WME interface showing remaining proposals for the current 24-hour window (e.g., "Proposals remaining today: X/10").

   • Proactive Warning: When an editor reaches the limit, prevent editing on segments that require a proposal, or display an inline warning right away (e.g., "Daily proposal limit reached. Further edits on locked segments cannot be saved today") before they start making changes.

   Currently, Level 1 editors are limited to submitting 10 edit proposals per day. However, the editor UI does not indicate when this daily quota has been exhausted.

   As a result, an editor can continue selecting locked segments, making extensive adjustments, and editing attributes—only to receive an error ("Editors are only allowed 10 proposals per day") when finally attempting to save. All of that un-submittable work is then essentially lost or blocked.

   Suggested improvements:

   • Visible Counter / Indicator: Display a counter in the WME interface showing remaining proposals for the current 24-hour window (e.g., "Proposals remaining today: X/10").

   • Proactive Warning: When… more

   3 votes

   Vote 0 votes Vote Vote

   Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   1 vote 2 votes 3 votes Remove votes

   You have left! (?) (thinking…)
   0 comments  ·  General  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

6. Dynamic "Emergency Vehicle Approaching" Highway Alert

   A crowd sourced, real time alert system designed specifically for high speed corridors (highways/freeways) that warns drivers to clear a lane before an approaching emergency vehicle (EV) reaches them.
   ​How It Works:
   ​Initial Report (The First Trigger)
   ​A driver on a highway taps Report > Hazard > Emergency Vehicle Approaching.
   ​To minimize distraction, this can be triggered via Voice Control.
   ​Direction and Speed Tracking
   ​Waze tags the report with the reporter's direction of travel and GPS coordinates.
   ​Waze's backend uses real time traffic flow data to project the EV's probable direction and speed along the highway stretch.
   ​Verification and Cascading Alerts:
   ​Drivers 1–2 km ahead in the same directional flow receive an audio/visual warning:
   ​"Approaching Emergency Vehicle Reported Behind You. Prepare to clear the left lane"
   ​A quick popup overlay asks receiving drivers to verify: [Confirm / Gone]
   ​Once 2 or 3 drivers confirm, the alert status changes to High Confidence, extending the alert boundary to vehicles further up the highway.
   ​Auto expiration:
   ​If drivers ahead click "Gone" or fail to confirm after the projected passage time, the alert automatically dissolves to keep the map clean.

   A crowd sourced, real time alert system designed specifically for high speed corridors (highways/freeways) that warns drivers to clear a lane before an approaching emergency vehicle (EV) reaches them.
   ​How It Works:
   ​Initial Report (The First Trigger)
   ​A driver on a highway taps Report > Hazard > Emergency Vehicle Approaching.
   ​To minimize distraction, this can be triggered via Voice Control.
   ​Direction and Speed Tracking
   ​Waze tags the report with the reporter's direction of travel and GPS coordinates.
   ​Waze's backend uses real time traffic flow data to project the EV's probable direction and speed along the highway stretch.
   ​Verification and Cascading… more

   3 votes

   Vote 0 votes Vote Vote

   Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   1 vote 2 votes 3 votes Remove votes

   You have left! (?) (thinking…)
   0 comments  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

7. Add a layal available to Area Managers to see issues in transit to aid in cartouche updates.

   Add a layal available to Area Managers to see issues in transit to aid in cartouche updates.

   3 votes

   Vote 0 votes Vote Vote

   Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   1 vote 2 votes 3 votes Remove votes

   You have left! (?) (thinking…)
   0 comments  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   Under consideration  ·  AdminElla (Waze Team) (Admin, Waze) responded

   Great thinking! We’ll share with the team; they’re always interested in new feature ideas.

8. Allowing to fill missing information in locked area map in editor

   In locked area map, please allow to fill at least the missing information such as road's name, city and so on.

   3 votes

   Vote 0 votes Vote Vote

   Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   1 vote 2 votes 3 votes Remove votes

   You have left! (?) (thinking…)
   0 comments  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   Under consideration  ·  AdminElla (Waze Team) (Admin, Waze) responded

   Great thinking! We’ll share with the team; they’re always interested in new feature ideas.

9. Improve satelite image

   In "Valera, Venezuela" the satelite image of Google is a real mess. I really loved the former images from the waze map. Do something google because your satelite image is not helping me to edit the roads in my city

   3 votes

   Vote 0 votes Vote Vote

   Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   1 vote 2 votes 3 votes Remove votes

   You have left! (?) (thinking…)
   0 comments  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   Under consideration  ·  AdminElla (Waze Team) (Admin, Waze) responded

   Great thinking! We’ll share with the team; they’re always interested in new feature ideas.

10. אפשרות להצעת שינויים על דרכים נעולות

    להוסיף אפשרות בעריכת המפה לשלוח הצעות לשינויים נעולים. שתהיה האפשרות לשלוח הצעה לשינוי דרכים נעולות עקב רמה נמוכה
    ואם אפשר בבקשה להסביר בצורה יותר טובה איך עולים שלבים, כמה נקודות כל שלב, ואפשרויות לעלות שלבים מהר לרציניים

    3 votes

    Vote 0 votes Vote Vote

    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    1 vote 2 votes 3 votes Remove votes

    You have left! (?) (thinking…)
    1 comment  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    Under consideration  ·  AdminElla (Waze Team) (Admin, Waze) responded

    Great thinking! We’ll share with the team; they’re always interested in new feature ideas.

11. Prefill city when using a street name suggestion

    When we currently enter the name of a street, we get autocompletion suggestions based on existing roads in the neighbourhood. It would help quite a bit if the associated city field would also be filled in whenever we use one of these suggested road names. I know that every street has a city set (or none, on purpose) in the underlying data model, so this shouldn't be a big effort to add.

    (see Mock up 1 + 2 attached )

    I'm still contemplating whether I'll write a userscript for this or not. It's not so easy to hook into those functions, if I remember correctly.

    Implementation notes:
    To distinguish between nearby street names that exist in two cities (motorway names, for example, but also local roads can sometimes keep their name between cities), it would be best to also show the city name in the suggestions list. At the moment road names show up several times in the suggestions whenever they exist nearby in more than one city, which can be slightly confusing at first.

    If no city is set for the selected street, the 'none' checkbox for the city should be checked as well. It can of course still be changed afterwards, but I suspect that most of the time this would be most practical.

    This behaviour should only activate if a suggestion has not been clicked or has not been navigated to with the down arrow (or any other means of selecting a suggestion that I'm forgetting here). When just typing in a name, the city should not be set automatically.

    Notes about my mock-up
    An alternative for detailing the city name would be using a comma as separator, like it is done when you're not editing the name. Other alternatives: putting it between brackets or making the font smaller. The last one has the advantage that it takes up less space.
    For the first one I had to decrease the left and right padding of the autocompletion to 15px to prevent the dropdown to be covered by the scroll bar. This can probably be done better.
    For the second one I used these CSS properties: font-size:0.7em; padding-left:5px; font-weight:bold; text-transform:uppercase

    by Glodenox
    Link to original suggestion: https://www.waze.com/forum/viewtopic.php?f=1525&t=250354

    When we currently enter the name of a street, we get autocompletion suggestions based on existing roads in the neighbourhood. It would help quite a bit if the associated city field would also be filled in whenever we use one of these suggested road names. I know that every street has a city set (or none, on purpose) in the underlying data model, so this shouldn't be a big effort to add.

    (see Mock up 1 + 2 attached )

    I'm still contemplating whether I'll write a userscript for this or not. It's not so easy to hook into those… more

    •  

    •  

    3 votes

    Vote 0 votes Vote Vote

    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    1 vote 2 votes 3 votes Remove votes

    You have left! (?) (thinking…)
    Looking into the suggestion  ·  1 comment  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

12. Selecting a search result shouldn't reset the zoom level

    When using the WME search box to find a road, it would be really nice if WME could leave the current zoom level well alone rather than always resetting it to level 3.

    Even if it just defaulted back to level 4 that'd be an improvement, but jumping back out to 3 means we then always have to zoom back in at least one step if we want to be able to select a street segment. And even at L4, anyone looking to do some work on point places would then need to zoom in one step more before they show up... So really, not altering the zoom level at all would be the best choice IMO.

    by Twister-UK
    Link to original suggestion: https://www.waze.com/forum/viewtopic.php?f=1525&t=276683

    When using the WME search box to find a road, it would be really nice if WME could leave the current zoom level well alone rather than always resetting it to level 3.

    Even if it just defaulted back to level 4 that'd be an improvement, but jumping back out to 3 means we then always have to zoom back in at least one step if we want to be able to select a street segment. And even at L4, anyone looking to do some work on point places would then need to zoom in one step more before they… more

    3 votes

    Vote 0 votes Vote Vote

    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    1 vote 2 votes 3 votes Remove votes

    You have left! (?) (thinking…)
    Looking into the suggestion  ·  0 comments  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

13. Improvements in segment selection for road closures

    Sometimes it's necessary to select multiple segments to perform a road closure either for MTE or for a conventional closure. After you have several segments selected, you accidentally select a node and all work is lost (the section disappears). I suggest making a modification that prevents the disappearance of the selection of these segments and notifies the editor that you selected a node and it will not be possible to make the respective closure (before or at the moment of trying to save). Obviously the idea is to give you the opportunity to remove the node from the selection and continue with the work.

    by kahlcolimon
    Link to original suggestion: https://www.waze.com/forum/viewtopic.php?f=1525&t=288148

    Sometimes it's necessary to select multiple segments to perform a road closure either for MTE or for a conventional closure. After you have several segments selected, you accidentally select a node and all work is lost (the section disappears). I suggest making a modification that prevents the disappearance of the selection of these segments and notifies the editor that you selected a node and it will not be possible to make the respective closure (before or at the moment of trying to save). Obviously the idea is to give you the opportunity to remove the node from the selection and… more

    3 votes

    Vote 0 votes Vote Vote

    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    1 vote 2 votes 3 votes Remove votes

    You have left! (?) (thinking…)
    0 comments  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    Added to backlog  ·  AdminWaze Team (Admin) (Admin, Waze) responded

    Hey!

    Thank you very much for this great suggestion.
    It was added to our backlog to try and see the possibility to implement it.

    Please note there is no ETA for it yet.

    Best,
    Hezi

14. New Place Address

    I'm not sure if it's a minor-bug or intended, but I ask you to take a look:

    Issue regarding Map Editor Beta and Production.

    :arrow: When you find a new place waiting for approval, if you click on the red arrow everything runs smooth, but if you feel the need to click on the yellow arrow to check what's that place is about before approving it (sometimes you can't tell just by the name title), notice it isn't possible to change the address... well maybe it's ok at this point before approving it.

    (attachment 1)

    • After you Approve you can't still change it.
      (attachment 2)

    • You need to click on the map background to remove selection and the click on the place again and now you can change the address. In my opinion this extra step is unnecessary.
      (attachment 3)

    by KarderGomes
    Link to original suggestion: https://www.waze.com/forum/viewtopic.php?f=1525&t=301965#p2064955

    I'm not sure if it's a minor-bug or intended, but I ask you to take a look:

    Issue regarding Map Editor Beta and Production.

    :arrow: When you find a new place waiting for approval, if you click on the red arrow everything runs smooth, but if you feel the need to click on the yellow arrow to check what's that place is about before approving it (sometimes you can't tell just by the name title), notice it isn't possible to change the address... well maybe it's ok at this point before approving it.

    (attachment 1)

    • After you Approve you can't… more

    •  

    •  

    •  

    3 votes

    Vote 0 votes Vote Vote

    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    1 vote 2 votes 3 votes Remove votes

    You have left! (?) (thinking…)
    2 comments  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    Added to backlog  ·  AdminWaze Team (Admin) (Admin, Waze) responded

    Hey!

    Thank you very much for this great suggestion.
    It was added to our backlog to try and see the possibility to implement it.

    Please note there is no ETA for it yet.

    Best,
    Hezi

15. Address localization

    lease allow localization of address field just as it is done in search results, so it would be possible to have "%{street} %{housenumber}" instead of "%{housenumber} %{street}" for some languages.

    by matsalka
    Link to original suggestion: https://www.waze.com/forum/viewtopic.php?f=1525&t=281056

    •  

    •  

    3 votes

    Vote 0 votes Vote Vote

    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    1 vote 2 votes 3 votes Remove votes

    You have left! (?) (thinking…)
    0 comments  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    Need more details  ·  AdminWaze Team (Admin) (Admin, Waze) responded

    Hey!

    Thank you for this suggestion, We will be happy to hear more on what will be the added value of this suggestion, if the info is presented in the correct way today already.

    Thanks,
    Hezi

16. Drive to Feature on Cartouche

    While editing the map I would like a separate layer so that I can make notes and pin it to areas of the map that I would like to visit. These online notes should only be viewable by the user who made the notes. It would also be necessesary to navigate to these Points of Interest and have the notes pop up so that pictures can be taken of the surrounding so that the Waze map can reflect real world situations out there on the road.

    The Waze notes layer (home computer) and the Android phone should be synced so that these notes can be produced while on the road so that you can remember what the issue was with this specific area.

    While editing the map I would like a separate layer so that I can make notes and pin it to areas of the map that I would like to visit. These online notes should only be viewable by the user who made the notes. It would also be necessesary to navigate to these Points of Interest and have the notes pop up so that pictures can be taken of the surrounding so that the Waze map can reflect real world situations out there on the road.

    The Waze notes layer (home computer) and the Android phone should be synced so… more

    3 votes

    Vote 0 votes Vote Vote

    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    1 vote 2 votes 3 votes Remove votes

    You have left! (?) (thinking…)
    0 comments  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    Not Planned [WME]  ·  AdminElla (Waze Team) (Admin, Waze) responded

    Thanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.

17. Color-coded according to speed in editor

    A feature that had been good when you are editing speed limits would be to go into a "Edit mode for the speed limit" just as the house number.
    That all roads would be color-coded according to speed. and roads with no speed would be gray, so you can easily see which roads have the limitation and which have not.

    Another thing that would be great is that you can put limits whereever on the road and not just at a crossing. Again, just as the house number.

    3 votes

    Vote 0 votes Vote Vote

    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    1 vote 2 votes 3 votes Remove votes

    You have left! (?) (thinking…)
    0 comments  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    Not Planned [WME]  ·  AdminElla (Waze Team) (Admin, Waze) responded

    Thanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.

18. Vehicle restricted closures

    Now: the closures are for all vehicles.

    SUG: possibility of applying a closure for a certain type of vehicle and not for others, for example: closures only for taxis.

    Idea by brooha40
    Link to the original suggestion in beta forum:
    https://www.waze.com/forum/viewtopic.php?f=1525&t=302017

    3 votes

    Vote 0 votes Vote Vote

    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    1 vote 2 votes 3 votes Remove votes

    You have left! (?) (thinking…)
    0 comments  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    Not Planned [WME]  ·  AdminElla (Waze Team) (Admin, Waze) responded

    Thanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.

19. Show house numbers on smaller zoom

    Currently the layer of house numbers only works on the the zoom levels 7-10. Please enable it starting from zoom 5.

    By: lg1992
    Link to the original suggestion: https://www.waze.com/forum/viewtopic.php?f=1525&t=301585

    3 votes

    Vote 0 votes Vote Vote

    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    1 vote 2 votes 3 votes Remove votes

    You have left! (?) (thinking…)
    0 comments  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    Not Planned [WME]  ·  AdminElla (Waze Team) (Admin, Waze) responded

    Thanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.

20. Parking Lots: Show Payment Types only when needed

    Please consider showing the 11 payment types checkboxes only when the "Cost" dropdown has "Low", "Moderate" or "Expensive" selected.

    This will help you to have consistent information too: For example, what does it mean that a free parking log accepts Credit Cards as a payment type?

    by bedo2991
    Link to original suggestion: https://www.waze.com/forum/viewtopic.php?f=1525&t=275529

    3 votes

    Vote 0 votes Vote Vote

    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    1 vote 2 votes 3 votes Remove votes

    You have left! (?) (thinking…)
    1 comment  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    Not Planned [WME]  ·  AdminElla (Waze Team) (Admin, Waze) responded

    Thanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.