Map Editor Suggestions
Welcome to the Map Editor's suggestion box!
This is the place to share your ideas for improving the Waze Map editor.
41 results found
-
Parking lot type (motorcycles-only, cars-only, both)
It's very common, at least in Colombia, parking lots only for motorcycles and it's really dissapointing to arrive at a parking lot suggested by Waze, and realize that it's a motorcycle-only parking lot and you're driving a car.
Please add a new property in WME to choose the type of parking lot: motorcycles-only, cars-only, or both, and add a new feature in app to filter by parking lot type.51 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Include temporary settings like HOV route selection in UR information
Relatively recently we got the ability to see some app settings in user reports. What we can't see are temporary settings like whether or not an HOV route was selected. It would be helpful to surface any information available that does not compromise anonymity.
48 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Receive reminder when closure will expire soon
The ability when adding a closure to select a checkbox to receive a reminder notification a couple days before expiry would be really useful. Sometimes when adding closures we do not know when the road will reopen, so the closure is set for a week or a month. So it would be great to know when these closures are about to expire so we can check and extend the closure if needed.
45 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Disable segment geometry changes in House Number mode
When in the "Edit House Numbers" mode, the Editor allows changes to segment geometry, but then generates an error when saving the changes. It is very easy to unknowingly edit segment geometry when trying to move a house number stop point. When this occurs, any HNs edited after that geometry change need reverted.
Please disable segment geometry changes when in HN mode.
42 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Recategorizing UR's when solving
Add a feature to WME to recategorize the Solved UR's when closing those. This would give Waze a true insight of what reports are really needed and vice versa, what are rare and could actually just be within General Error category etc. Based on my research of all Solved UR's in Finland for last 3 months only about 50% were in right category.
In my opinion this would help to reduce and refocus UR categories to better match with reality which in turn helps users when they are reporting meaning less UR's with wrong category -> Better data and better…
42 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Dark Mode in WME
You know you want it.
An example of what it could look like: https://imgur.com/a/9ckUEVf
40 votesHey,
Please note we're changing the status of this suggestion to Currently Not Planned, since we finalized our plans for 2024 and this idea won't be implemented this year.
We hope to include it in our plans for later down the line.
Thanks!
-
No feedback provided if permalink is unable to select items
Currently there is no feedback given if one or more items are not selected when opening a permalink (i.e segments, places, URs, etc.).
For instance, I have a document with PLs of segments that are always closed during events (such as stadiums). If a segment ID is changed and therefore no longer linked in the PL, I have no way of easily knowing this.
Please consider providing some sort of warning if WME is unable to locate all the linked items.
39 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Issue Tracker Saved Filter: Should be able to modify/edit an already saved filter
I should be able to modify or edit an already saved search.
When saving a new filter, a dropdown of saved searches should be displayed, and if one is selected, an overwrite warning should appear. This should be alongside a "create new filter" option.
39 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Junction box, add ability to demand a pass or mark as private for specific route
Junction box is still evolving so it would be good to add one more feature to it. We have situations where driving through a longer section of road is only permitted with certain conditions but driving to an address in between or to drive across the affected street from different direction is always allowed.
Thinking about a possibility that those conditions could be set as a pass and then apply it only to specific route in junction box. This could probably also be used in a way that you could set a specific route to be private road in routing,…
37 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Roads with permits for residents only
Very often there are streets that can only be used by residents.
It would be useful to be able to set the segments on the WME "residents only".
This way only those who add their home address on those streets in to the app will be able to use them.
It is different from editing a road as private, because it would only allow access to residents, whereas now if you search for a destination on a private road everyone can access it.37 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Show stop points in the House Numbers layer
The House Numbers layer currently displays only the location of the HN, but not the stop point on the related segment. In HN editing mode, when you select the HN, the stop point also becomes visible, with a dotted line from the HN to the stop point. Suggestion is to display the stop point and the dotted line as part of the House Numbers layer, even when not in HN editing mode. (This might either be visible only at a high-enough zoom level, such as 18, or be an option that the user could enable from the layers menu.)
36 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Event based restrictions
Sometimes for major events and after major emergencies (wildfires, hurricanes, flooding) there are roads that are open to residents but not to the general public.
I would suggest something that can be applied like a real time closure, but acts more like setting the road to private so it allows routing onto the segment but not through the segment.
This may be related to Permanent Hazards instead, but however it is implemented it should not require a tile update.
35 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Make RPPs a bright pink
Change the colour of the RPP from a camouflaged dusky pink (same shade used to literally camouflage reconnaissance Spitfires in WWII) to a bright pink like #fa0584 to make it more visible in urban backgrounds.
30 votes -
Speed limit map error
I would insert the ability to see the speed limit map errors reported by users with the function to be enabled or disabled in the control panel.
This possibility, unfortunately, is only available for those who have access to the WME beta but it can be free for everyone.30 votes -
Issue Tracker: Stop defaulting to All Issues - remember last saved filter selected
If you don't have a Pinned Save Filter, Waze should remember the last Save Filter selected rather than reverting back to "All Issues".
If I'm working on a Saved Filter, and need to refresh, it's more than likely I want to continue working on that same filter afterwards.
29 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
New Permanent hazard: Check-point
In many countries, fixed check-points are installed on the road. It could be done by Police, Customs, Tax services, Weight check... and even borders.
It would be great to have those marqued on the map as permanent Hazard " Check point". It has basically the same effect of a toll booth: You often need to stop there, or a least drive through at a very reduced speed.
This would be a great safety enhancement for both drivers and those manning those check points.
25 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Avoid Tunnels
New feature in the app and WME to avoid tunnels such as ferries, tolls…
25 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Notification in WME for tile build delay
If there is a delay in the tile build or the map is rolled back for some reason, please show a notification in the WME.
23 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
WME Road Types
The current classification of roads on the WME follows the road types in the USA (Freeway, Major and Minor Highways and other road types).
In Europe, but I think also in other parts of the world, the classification of roads is very different. This creates problems with editing roads, as it is difficult to adapt the WME type to the real situation.
It is necessary to revise the road classification of the WME according to the real classification of each country so that each country can edit the map in a correct and more real way.23 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Editing permissions - change request
I suggest to chane some editing pernissions as follows (the current required level is given in parenthisis):
- Giving a "narrow street" road type to a segment: 3 (1)
- Entering a TBR / TBTR (this includes difficult turn and toll road designation): 3 (1)
- Enter a turn instruction override: 3 (1)
- Delete a segment that someone else created: 3 (2)
- Create a new MTE: 4 (1)
- View RTC details (view only): 1 (4)
- View of house numbers: 1 (2)
22 votesThanks for the suggestion, but this is part of a bigger project that would involve being able to configure different entities in countries, which is not currently planned.
- Don't see your idea?