Map Editor Suggestions
Welcome to the Map Editor's suggestion box!
This is the place to share your ideas for improving the Waze Map editor.
1441 results found
-
New categories - apartment complex/building
Add a new category for "apartment complex" that'd include multi-building condos and coops. The "apartment building" category would be for single-building condo or co-op companies.
12 votes -
Provide helpful suggestions when showing a save error
When you display a save error in WME, please give us helpful suggestions on how to resolve the issue, not just a generic "check and try again." Check what? What are we looking for? How do we fix it? What is "modifying GuidanceMode? What are CS Lanes? Saying "Check and try again" doesn't help.
Example:
Modifying GuidanceMode is allowed only for CS Lanes
Suggestion: Check and try again12 votes -
"Show on map" in UR should zoom in to UR itself, not to its route
It happens rather often: when I open a UR and click "Show on map", WME zooms in, but the UR isn't visible. I need to zoom out 1-2 levels in order to see the UR and then zoom in to it manually.
I guess, the algorithm of WME calculates the "Show on map" point basing on the user's route. But the user saw the problem in the point of the report, so WME should zoom in to it.
12 votes -
Address announcement
When you arrive at your destination have the app say “you have arrived at 12 thirteen st” or something similar. I use Waze through another scheduling app and I always have to check the other app to see what the street number is that I’m actually navigating to
12 votes -
Time-based restrictions with annual repetition.
We should be able to place traffic restrictions on a segment, for example in the summer (June 1st to September 30th).
As the 1 has already passed, we can only place it from today (June 22) and we can only correct it to be correct for the next year after September.
In this case, it should be possible to insert the total (correct) date of the restriction.
12 votes -
Add possibility to add Hump alert on the road
Add possibility to add Hump alert on the road warning the wazer that there is a hump with voice sound instead of beep.
12 votes -
Use Paths or Restricted Areas to create drive through restriction
Amount of residential areas where drive through is forbidden is increasing everywhere. I was wondering could either Paths or Restricted areas have an extra setting "Not allowed to drive through" and by setting it router would prohibit such routes. Paths would work on smaller areas but in bigger ones would have to be set with Restricted area.
12 votes -
A better separation between different road types in the layers panel
When working on complex junctions, tunnels, train tracks, and pedestrians, and when all of them are in the same area, the map becomes a real mess and is hard to work with. I suggest adding additional layers to toggle off the visibility of road types and a layer to hide tunnels (or change their transparency at least and make them unselectable and disable snapping).
Take a look at this picture, and you'll immediately understand the issue.
https://i.ibb.co/NFs8jQx/image.png12 votes -
Detour routes
We need the ability to add detour routes (paths) that can be added and removed in real time and/or scheduled to use in conjunction with closures. Often when local authorities announce closures, the also specify preferred detour routes.
12 votes -
Provide a font size option. I do not need glasses to drive, but cannot read small print.
Provide a font size option. I do not need glasses to drive, but cannot read small print on messages.
12 votes -
Move RRC and Camera layers to hang under Permanent Hazards
With the introduction of Permanent Hazards Railroad crossings and Cameras have been moved into the Permanent Hazard menu. It would now make (a lot of) sense to also apply this to the chart layers, to prevent people from wondering why railroad crossings or cameras are greyed out in the menu while they do have the permanent hazard layers checked on. It should be similar to how the Places layer has been restructured.
Unless it will be merged into the hazards layer of course, then this is redundant.
12 votes -
Road shields, ability to add different sign as override to the major one used for that street name
In Finland, we currently have named roads as "180 - Saaristotie" etc. and would like to get rid of the number in street name and just leave the shield. But that is not possible because we have quite a few locations where road number changes while road name stays the same. Another problem is when road category changes to minor road so that the number drops off completely.
So there is a need for feature where you could set an override shield to selected segments while the default sign for that road name stays active on other segments.
12 votes -
Suggestions for seeing the number of users who viewed our profile on WME
As in the waze discuss profile we can see how many people have seen our profile
Can something similar be implemented in our profile on the Waze Map Editor https://www.waze.com/user/editor/user
so we can see how many of our wme profiles have been viewed by users
thank you
12 votes -
WME External providers marked as Permanent closed as a Places Problem
Many Places in Waze have a External providers marked as Permanent closed, and action needed to either remove it (if the places are permanently closed) or remove the problematic External providers link( if the places are active but the External providers link are marked as permanent closed).
However, we as an editor are no ways to know if the External providers link are still active nor it is marked as permanent closed.
So. can we have WME to detect those External providers link and trigger a places problems (something like map problems) for editors to check and fix the problematic…12 votes -
House Number Mode Delete/Trashcan
With the new House Number editing mode, with the segment selected and actively editing house numbers, using the trashcan removes the segment and not the house number.
If I'm editing house numbers, the house number I have selected should be the object deleted. This is not a consistent behavior across WME.
12 votes -
Support optional "display name" specifically for Area Places
The "name" field of an Area Place serves two completely separate functions. First, it seeks to form, together with the address, a unique search hit; this could involve a lot of text. But second, it displays on the app for everyone nearby.
Most drivers probably don't care about detail in the displayed name; for them, excessive detail may distract rather than help. For example, in some countries editing conventions dictate that rest stops along freeways should have highly detailed primary names in order to make them useful search hits, such as:
"Rest Area (no facilities) - I-680 mile 58 Benicia-Martinez…
12 votes -
Add "Any date after today" for age of new aerial data requests (Request updated imagery)
BLUF Recommend adding an option for “Any date after today” Especially for new construction.
Thank you for adding the Request updated imagery straight from WME to the WME Beta site. It allows one to request imagery that is 1 year, 6 months, 1 month. To improve the process it would be great to add "Any date after today". For construction the new configuration may have occurred within the last month or significant changes were made within the last month (lane guidance painting, etc.
12 votes -
Select and edit multiple RPPs
When you have a street name changed, HN numbers don't need to be modified.
When you have a street with many RPP, you have to change the street name in each RPP, one by one.
This is also the argument of some publishers who do not want to use residentialIt should be interesting to be able to select many RPP of the same street (with the control key for exemple or an option on the segment) to be able to change the street name in one time and in each RPP.
12 votes -
Let me create custom routes on the map editor, that can be pushed to my device(s).
I know all the best routes from work to home and vice versa. Let me create those routes in the map editor then "push" or I can "fetch" them to my device(s). Then when I get in my car and open waze and asks if I'm going home or to work the first routes it pulls from are my custom ones, and creates a heat map list or something that I can choose from.
12 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Blocking the APPROVAL or EDITS of a place if the corresponding label is off.
Now that the CREATION of a place if the corresponding label is off is implemented, the same principle should also be applied to APPROVAL or EDITS of those places.
Otherwise we can be adding duplicates to the map
See example:
https://i.imgur.com/dHcAOpE.jpg11 votes
- Don't see your idea?