Map Editor Suggestions
Welcome to the Map Editor's suggestion box!
This is the place to share your ideas for improving the Waze Map editor.
339 results found
-
Improve House Numbers Editing Interface Clarity
Since the version 2.272, the HN interface has become visually overloaded mainly on cross roads. In the previous version, entering house numbers mode would visually isolate the numbers belonging only to the selected street. This behavior was much more intuitive and provided a cleaner, distraction-free environment for editing.
We suggest restoring this functionality - either by default or as an optional toggle - so that only the house numbers from the selected street are shown during editing. This change would significantly improve clarity, reduce errors, and enhance the overall editing experience.
Thank you for your consideration.
104 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Allow closure overlapping
Hi,
very often I am notified of an event that needs closure after it started, then I go to select the many segments that must be closed.
When I want to add a proper closure on them, there are already dozen of closure made by drivers and I have to remove all of them one by one before adding mine. That's annoying because it is slow, and sometimes new closure are made by drivers while I am removing them :And overlapping closure are not a real problem because when it is done by waze app it happens often so…
35 votesHey!
Thank you for the suggestion.
In order to check this suggestion, we would like you to share some more examples with us.
We aim to get the understanding of how often this is an issue.Best,
Hezi. -
A place with an expiration date
I would like to suggest adding an expiration date to a place. When the expiration data is reached the place deletes it self from the map. This option is good for places such as events like weddings, parties, sports tournament etc..
Today, many such places which their event date passed exist on the map and nobody remembers to delete them and the map gets loaded.
The expiration date default would be of course - No expiration so that new places would not be deleted.
Such an option is already implemented in Map comments.By: reuvenirony
Link to original suggestion: https://www.waze.com/forum/viewtopic.php?f=1525&t=27612521 votesGreat timing! We’re currently working on adding an expiration date to a place. Keep an eye out for updates on the WME.
-
Split Place
After the succes of the Merge Places feature I would like to add a request to Split Places.
There are instances where wazers add a photo to a place that is not related to that place, but something nearby. At this moment we don't have a choice but to reject the photo. I would like an opportunity to use it to create a new place.
By: GerardterBeke
Link to original suggestion: https://www.waze.com/forum/viewtopic.php?f=1525&t=29318121 votes -
Speed limit update requests to Production in ROW
Given that the appearance of SLURs has now calmed down I would like to make a proposal to move SLURs from beta to production editor.
There are, however, two questions to everyone in ROW:
1) can you reports SLs from app? New SLURs pop up from time to time, but I haven't been able to make one myself;
2) would you like to bring all previous SLURs to prod or have a reset and make a fresh start? My vote goes to "bring everything to prod", because the current amount and appearance of new ones is manageable.By: matsalka
Link…23 votesHey!
Thank you for this suggestion.As it was announced in the forum we are currently working on improving the SLUR workflow and user experience.
This suggestion will be taken into consideration in the work.So, thank you again we will update accordingly.
Hezi
-
Clean restrictions type
Hi
Now that restrictions are limited to actual supported vehicules, can data be cleaned in those actives?
Truck, coach... are visible but can't be deleted.
Hope I'm clear enough :D
Thanks
by JohnDoe75
Link to the original suggestion: https://www.waze.com/forum/viewtopic.php?f=1525&t=3004431 voteThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Navigate to place point by address
As we've added more parking lot roads to shopping centers wazers have become accustomed to being directed to a specific store when they search by name. As a result, they are reporting navigation errors when navigating by address results in a stop point on the road in front of the stopping center. This is particularly bad when the route has to circle around the shopping center to reach the house number.
To work around this, we've taken to adding both a PP and a RPP when a store in a shopping center has a unique address.
It would be great…
53 votes -
ICON Change on RTC for Turns
Currently when you select a segment with an RTC on a turn arrow, you just see the white fence/barricade icon that you see on the node. You then have to hover over the turn arrow, then click on Turn Closures and go to the window that popped up to see if these are active or finished.
I would like to see the icon changed to the the Red Closed symbol when active, like we see on segments when they are actively closed, and then the grey circle we see when they are finished. It would help tremendously in deciding if…
74 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Increase the four types of fuel limit to map editors
Map editors have only four types of fuel to select and due to this incompatible diesel types or GNV can not be searched in waze.
18 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Add keyboard shortcut for Permanent Hazard Direction
At the moment, the UX isn't very user-friendly when it comes to selecting the direction for Permanent Hazards. We have to choose between A/B without actually seeing where A or B are..! 🙄
A/B are displayed only when segments is selected, but hazard direction can only be adjusted when hazards themselves are selected.
Since we already have a shortcut to 'Toggle segment direction', could we extend this functionality to Hazards as well?
Link to the original discussion: https://www.waze.com/discuss/t/new-feature-alert-permanent-hazards-now-available-in-wme-all-environments/350757/36
28 votesGreat timing! We’re currently working on the keyboard shortcut. Keep an eye out for updates on the WME.
-
POI's moving distance
At the moment moving a POI have a distance limitation (2km I belive?) Sometimes when a business changes phisical place to another place, like 10km away, we need to move the POI like 2km, save, move again, save again...
It makes no sense. Please remove it or allow us to move POIs further.
Thank you.
46 votes -
custom layers and map editor colours / themes
so I have used Waze for a bit and I love seeing the editor map with the coloured roads, but there's a few problems...
- no support in night mode
- can't change the colours, even if it's there to match the sign sometimes I want to have custom colours,
- can't have custom layers, sometimes I want to have the alternate route 1 in Melbourne Australia white or create my own custom routes. a layer I would like to create is a mobile camera colour where a road that has mobile cameras and such shows up as a custom…1 voteThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Allow residential places to be moved farther from their "parent" street
Currently, it is generally not possible to create a RPP at, or move an existing one to, a location more than (approximately) 550 m from a segment that has the same street name as the RPP. However, in rural areas of the United States, it is not unheard-of for houses to be located much farther than that from the nearest road. Suggestion: increase the allowed distance for RPPs to at least 1,500 m (no objection if this would require a higher editing level to accomplish than the default R1 for creating an RPP).
75 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Editor visibility default state should be Visible (not invisible)
Problem Description:
I frequently see my status as invisible when logging into WME, even after I have previously explicitly set it to visible. The visibility appears to reset back to invisible after some time has elapsed, maybe a day or more, or perhaps it resets after session expiry. I am not certain exactly what criteria causes the visibility to reset back to invisible. I would much prefer to remain visible in WME without having to repeatedly check and manually set myself back to visible each time I authenticate or access WME.Requested Solution:
Please adjust the default value or default…48 votes -
House number layer should disable
With the new house number editing flow, once you edit a house number and leave house number editing, the House Number layer remains active. The layer should return to disabled if it was disabled before editing the house number.
36 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
House number change history
When selecting a house number the interface no longer shows who last modified the house number. History on the segment doesn't always show what was change (it might show added or deleted, but not moved or edited). Segment history needs to have more detail on what was done.
67 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Copy button for segment/place address
Very often you have to search info for address while editing maps and it could be made a lot easier by adding a copy button to copy address on properties panel. Or maybe 2 buttons, 1st for just the street name, 2nd for whole address.
51 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Adding a comment when requesting new aerial images
When L6 editors request up-to-date images for the WME, it would be useful if they could write a comment (for example, for whom they have requested the images) and this comment should also reappear when they get the notification that the new images have been provided.
It could also be helpful to have access to a list or map showing the areas that the new images were requested for so that new images are not requested for the same area by different editors.
48 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Add entry point automatically for RPP and Point Pkace
Would it be possible to add entry points for RPPs and Pont Places automatically by default like for the HN?
Now after inserting the RPP or Point Place on the map, also bringing them closer to the relative segment, often Waze does not take you to the desired arrival point and so to solve the problem we have to manually insert the EPs.
I think it would be useful if it was automatically inserted by default as it already happens for HN, so the editor would immediately understand where the navigation will lead .
We will also fix the problem…49 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Include temporary settings like HOV route selection in UR information
Relatively recently we got the ability to see some app settings in user reports. What we can't see are temporary settings like whether or not an HOV route was selected. It would be helpful to surface any information available that does not compromise anonymity.
51 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
- Don't see your idea?