Map Editor Suggestions
Welcome to the Map Editor's suggestion box!
This is the place to share your ideas for improving the Waze Map editor.
1595 results found
-
Touristic Routes...
Touristic Routes
In my country, Portugal, as in almost all countries, we have beautiful places to visit, cities to see and, for that, among the various means of transport that we can access, of course, the motor vehicle is one of them... and for that, you need a road to drive...
When we are on vacation for example, we want to go and visit these places and we map routes, marking it in a diary (or something similar) what we want to visit and see...
In WME, some of these routes could be defined by the editors, be pre-defined and…
14 votes -
Allow applying A->B closures on B->A segments (and vice versa)
When selecting a one-way segment with a closure, and another segment without a closure, it is currently possible to select "Apply on all" to extend the closure to the second segment.
This only works if the second segment has the same one-way direction of the first segment.
When a segment with an A->B/B->A closure is selected, add a new option "Apply closure in any direction", which applies the currently selected closure as "both" on all additional selected segments.
26 votes -
Cropping tool for attached images
While adding images from the editor is a bad idea, it could be useful to have the ability to crop images. This could allow generally good image to be improved and kept instead of removed.
9 votes -
Include Lane Guidance with URs in purple provided route
Currently when we get a UR, we can see what primary instructions were given to users at junctions. Now that we have lanes, it would be helpful in diagnosing problematic lane configurations if we could see what lane guidance information was presented to the user as well.
By: alexs001
Link to original suggestion: https://www.waze.com/forum/viewtopic.php?f=1525&t=306981307 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Allow closure creation in "Current live map/snapshot" mode
At the moment, it is no longer possible to add a closure to a segment you have removed or split up, even though this segment is still being used live in the app. If it were possible to add closures in the snapshot mode (recently renamed to "Current live map"), even with a strict time limit, our life would become a lot easier during road works.
At the moment, we need to apply segment restrictions, wait for the map update, remove the closure, make our changes, wait for the map update and then probably add new closures. If we can…
130 votes -
Improve RPP editing when it conflicts with HN layer
When adding or editing RPP, if there is a conflict with the HN layer (i.e. too far), then the WME issues an error that prevents you from saving your edit. Thus, you cannot add or update this RPP.
To resolve the issue you need to perform the following steps:
1. Update/Remove the address in HN layer
2. Wait for next (successful) map build
3. Add the RPPThis is an annoying procedure that should and can be avoided.
The issue can be handled in one of the following ways:
1. Verify the RPP against the most updated data either in…132 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Have the possibility to select BUS icon in LG
The request is very simple.
In WME when setting LG having the option to mark one lane as BUS (not with any direction or routing options behind it)
During Navigation display the arrows and BUS when Lane Guidance is shown.Example: Left Straight Straight Right one lane is bus
Shown as: Left Straight BUS Right during LG in waze22 votes -
Improve the GPS points layer
To branch off the discussion from the WME release topic:
RichardPyne כתב:
I would find GPS points much more useful if they were color coded by age rather than direction. Th arrows provide useful direction, but in areas where traffic patterns are changing due to construction, knowing the age of the trace would be far more useful.dchary2418 כתב:
It could help if the GPS traces were the same original color, but shaded darker for older data.Glodenox כתב:
I'd be all for somehow showing the age of the GPS points. Especially the more recent data seems of interest to…169 votes -
Receive reminder when closure will expire soon
The ability when adding a closure to select a checkbox to receive a reminder notification a couple days before expiry would be really useful. Sometimes when adding closures we do not know when the road will reopen, so the closure is set for a week or a month. So it would be great to know when these closures are about to expire so we can check and extend the closure if needed.
45 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Manual input for zoom level
With all the new zoom levels being planned, clicking the +/- to go up/down in zoom gets very tiring. This suggestion is to add a "Manual" number input field between the + and - to
a) display the zoom level (instead of using a tooltip) - disadvantage of tooltip is you have to hover your cursor over the zoom control
b) allow you to manually input the number you want the zoom to jump to. For example, you are at zoom level 20. You want to get to zoom level 12. Instead of clicking - 8 times, you type "12"…
16 votes -
Routes in a Junction Box should have different gradients of colors
When selecting a segment entering a Junction Box all possible routes are shown with a green color when the route is valid and red when it is invalid/forbidden. These routes can be mixed and sharing the same segment. To see which segments belong to specific routes the editor must hover the mouse pointer to the exiting arrow. The idea here is to be able to visualize without doubt each route (for instance, when sharing the JB screenshot)
5 votes -
Need options for Unit/Apt/Space/Suite/Building numbers on addresses and RPPs
I am seeing more and more large apartment/condominium/business complexes with multiple buildings all sharing one street address, and am more frequently getting URs about incorrect addresses because of it. Note, that the designation need to be alphanumeric.
49 votes -
Allow direct editing of alt names and cities
Currently alt names or cities can be changed only by deleting the existing name and re-creating a new alt name. Please allow direct editing of alt names. Also it would be great if primary and alt names were draggable so an alt name could be promoted to the primary name without deleting and recreating.
56 votes -
"View in Street View" button for places
Added "View in Street View" button for places, similar to what update requests have.
This request is motivated by the fact that, at times, Street View is not aligned with the segments and you have to go hunting for the point where it is available.7 votes -
Auto set checkboxes "No street" and "No city"
Remove the "No street" and "No city" boxes by automatically setting the segments with the flag active if the name and/or city is not entered and vice versa.
7 votes -
The option to turn off certain items in map display, like schools, libraries, parks, etc.
As the subject says, it would be nice if we could un-clutter the display by having the ability to turn OFF certain items on the map display like schools, churches, libraries, parks, etc.
53 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Add closures to new segments
It would be really great if we could add closures to segments just after creating them. Currently that's not possible. In this case, once the segments are built into the map, the closures would be added to them automatically
Why?
Sometimes city administrations make few changes in the traffic by creating new roads. The problem is that most of the times (at least where I live) we don't know exactly when those roads will be released. In addition, map build may delay.
So, as soon as we know a new road will be built, we can create it on WME…
366 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Revise points awarded for different edit types
Some types of edits are time/labor intensive (adding HNs for example) but earn few points. Others, such as adding RPPs or new streets earn more points and can be done quickly. As a result some edits that really need work but earn few points are neglected. Please take a look at making points earned more equitable based on time/effort needed.
6 votes -
Show Lane Guidance for all editors
Show Lane Guidance (LG) for all editors regardless of level.
Today there is a limit to handle LG. In my country the limit is set to a higher value than my level. At present we lowlevel-editors cannot see the current LG and therefore we are not able to propose a adjustment of a existing LG nor propose a new.115 votes -
Ability to reorder or select primary picture
Allow the editor to select the primary picture shown in the app that best represents the location for the driver. Another option is to allow drag and drop ordering of all the pictures available in order of precedence.
16 votes
- Don't see your idea?