Map Editor Suggestions
Welcome to the Map Editor's suggestion box!
This is the place to share your ideas for improving the Waze Map editor.
1478 results found
-
JB, RRC, Camera: Edit only when the layer is on
For Place you have to enable the layer. This is a good feature so you can‘t create something what is still there but hidden.
Can you expand this also to JB, RRC, Camera?42 votes -
Closed Place - Permanent/Temporary
Suggestion:
"Place Closure" Feature.
Please provide an option for editors to mark any place as closed, preferably with permanent closure or temporary closure options. Based on these two choices, branching options should be displayed.
For example, if a place is marked as permanently closed, the reason should be displayed along with an option to delete the place from the map.
If it is temporarily closed, options for duration and reason should be shown.Additionally:
Display a warning to drivers before starting the journey, along with a red icon indicating that the place is closed.Many people I have spoken to…
42 votesGreat timing! We're currently working on the ability to close places permanently or temporarily. Keep an eye out for updates on the WME.
-
Disable and restore to default of the issue tracker filters
Please add two important features to the issue tracker:
1. Temporarily disable all filters in the issue tracker (show all URs, PURs etc.), without changing the filters, so that the editor can later on enable the filters in order to have the defined filters without the need to redefine them.
2. Restore the issue tracker to its default state, so that all the previously changed filters will be returned to their default state.
These features will be very useful.42 votes -
Disable segment geometry changes in House Number mode
When in the "Edit House Numbers" mode, the Editor allows changes to segment geometry, but then generates an error when saving the changes. It is very easy to unknowingly edit segment geometry when trying to move a house number stop point. When this occurs, any HNs edited after that geometry change need reverted.
Please disable segment geometry changes when in HN mode.
42 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Recategorizing UR's when solving
Add a feature to WME to recategorize the Solved UR's when closing those. This would give Waze a true insight of what reports are really needed and vice versa, what are rare and could actually just be within General Error category etc. Based on my research of all Solved UR's in Finland for last 3 months only about 50% were in right category.
In my opinion this would help to reduce and refocus UR categories to better match with reality which in turn helps users when they are reporting meaning less UR's with wrong category -> Better data and better…
42 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
MTE: exclude segments
It'd be great if there would be an option to exclude certain segments from MTEs.
Either have the MTE snap to a certain elevation level (e.g. exclude underground highway tunnels, or elevated highways,) or exclude certain road categories, such as currently done in Permanent Hazards.41 votes -
Automatically select road name text when editing
In the latest version of WME, when you open up the "edit" dialog to adjust a street name, and then click on the text box for "name" or "city", it drops the cursor at the end of the box. It would be nice if the existing text in the box is highlighted so you don't have to manually select the text to clear the box when editing the name of the street or the city name
41 votes -
Easier way for cutting a segment
There are a lot of occasions where the properties of a road (eg speed) changes within the same segment. Currently the only way to cut segments is to add a road with a junction on the spot where one wants to split the original segment and immediately remove the added road.
This is rather cumbersome/overkill and could lead into incorrect data.
Other map reporting tools have a segment split option within a simple right hand mouse click and it would be nice if a more simple way would be available in WME too.41 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Additional Imagery requests feedback
With the great feature of Additional Imagery, we can make requests for updates using "The Button".
If the imagery update meets our needs, we should be able to confirm that it did (like a thumbs up for alerts in the app).
If we get an alert that imagery has been updated, but the imagery is not sufficient (not new enough, clouded over, etc), we have to submit a new request. Instead of submitting a new request, there should be an option to reopen the original request to get newer/clearer imagery.
As is, there is no easy way to provide feedback…
41 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Allow for polygons in major traffic events to be bigger than 20km
Waze Map Editor doesn't allow a polygon bigger than 20km to be used for a Major Traffic Event.
Example: Attempting to create an MTE for Twin Cities Marathon that only targets a 0.06mi buffer around the route itself, so it only alerts affected drivers.
40 votes -
Allow hyphenated house numbers in RPPs
In my AM in Iowa there are several neighborhoods that have hyphenated house numbers. Here's an example: https://beta.waze.com/editor?env=usa&lat=42.40782&lon=-91.76381&zoom=6 Since they are on a private road RPPs should be used but can't be because hyphens are not permitted.
40 votes -
Improve/change the error message
Improve/change the error message when low level editors tries to delete the house number on streets with higher locks. Now we got "Error saving, try later" message. It gives, to editor, no idea of what the problem is, and the user may thinks that's a WME bug. By changing this message, it will give to editor and mentor/higher levels editor's more information to understand where the problem lies.
40 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Roads with permits for residents only
Very often there are streets that can only be used by residents.
It would be useful to be able to set the segments on the WME "residents only".
This way only those who add their home address on those streets in to the app will be able to use them.
It is different from editing a road as private, because it would only allow access to residents, whereas now if you search for a destination on a private road everyone can access it.40 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Flagging matches with permanently closed venues
With the "Enhanced Matching" between Waze and Google venues going live, some Waze venues are matched with 'Permanently closed' place from Google Maps.
While these are accurate matches, we won't know these places are permanently closed until an editor interacts with the place or a user reports it to us.
My suggestion is to flag such matches to be reviewed by editors. A PUR or something like that.
40 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Conditional lane guidance
There are many cases in highways where there is an on-ramp shortly followed by an off-ramp. In those cases, the right lane/s serve for those who get on the HW from the on-ramp, as well as those who get off the HW on the off-ramp.
A wazer that gets on the HW from the on-ramp and has to continue on the HW should get lane guidance to go onto the left lanes when approachng the next junction of the off-ramp, otherwise, he might continue on the right lanes and get off the HW.
A wazer that comes on the HW…39 votes -
Move closures history to the Closures tab
Move the information about the closures history of a segment from the General to the Closures tab. This way the closures information won't interfere with important segment changes history and it will be easy to look the specific information. The "last date" will then be correct for each of them - segment changes and closure changes. Also, being in the Closures tab will allow for more data about the closure to be included (incorporating Script features - URO+ or the new WME History Enhancer).
https://greasyfork.org/en/scripts/449557-wme-history-enhancer
39 votes -
Map Suggestions need hotkey
Map Suggestions are a layer in WME. If you want to see under the suggestion, you have to disable the layer. The only way to do that is via the Layer menu. There is no option for setting a hotkey.
39 votesGreat timing! We’re currently working on adding a hotkey for map suggestion. Keep an eye out for updates on the WME.
-
Off road / Unmaintained road should not have the unpaved option
The "Off-road / Unmaintained road" type is almost always unpaved, and in cases where it is paved, it is not to be treated as paved. Thus the "Unpaved" attribute of such a segment is not needed. Moreover, it may sometimes cause an unwanted route when there are some segments that have the unpaved attribute whereas some don't have that attribute.
I suggest removing that attribute from that type of segment.39 votesGreat timing! We’re currently working on it. Keep an eye out for updates on the WME.
-
keyboard shortcut for adding POI
A significant workflow inefficiency within the Waze Map Editor (WME) currently stems from the lack of keyboard shortcuts for adding Points of Interest (POIs). Users are required to rely solely on mouse interaction – hovering over the POI menu and clicking the desired category – every single time they need to add a new point.
This becomes particularly tedious for editors who frequently utilize specific categories. For instance, I personally rely heavily on the 'OTHER' POI category. This isn't for standard points, but rather as a necessary workaround to map complex Residential Place Points (RPPs) or House Numbers (HNs) that…39 votesGreat timing! We’re currently working on the keyboard shortcut for adding a POI. Keep an eye out for updates on the WME.
-
Add new layer with Road Signs (generated from Street View)
Use AI models to identify Road Signs from existing Street View images, and surface them in WME as a new layer.
Road sign examples:
- Speed limits
- Stop/Give way
- No entry
- Prohibited turns
- Sharp bends
- Lanes mergingIdeally this new layer should come with sub-layers and allow editors to show/hide on demand (similar to how Hazards currently appear in WME). Sub-layers could be groups - for example:
- Warnings
- Speed limits
- Orders
- Instructions39 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
- Don't see your idea?