Map Editor Suggestions
Welcome to the Map Editor's suggestion box!
This is the place to share your ideas for improving the Waze Map editor.
1544 results found
-
Show a character counter for entering a name of an event
Since the name length of a traffic event is technically restricted also the WME limits the name input after the maximum length ist reached
(https://waze.uservoice.com/forums/59225-map-editor-suggestions/suggestions/41814004-limit-name-input-in-event-mode implemented).It would be even more helpful if there would be a char counter that shows the remaining length for the name.
This requested behavior is already the case for entry boxes of map comments and URs.
14 votes -
Touristic Routes...
Touristic Routes
In my country, Portugal, as in almost all countries, we have beautiful places to visit, cities to see and, for that, among the various means of transport that we can access, of course, the motor vehicle is one of them... and for that, you need a road to drive...
When we are on vacation for example, we want to go and visit these places and we map routes, marking it in a diary (or something similar) what we want to visit and see...
In WME, some of these routes could be defined by the editors, be pre-defined and…
14 votes -
Closures - Don't return to top of list
When you have a lot of closures on a segment, Waze goes back to top of list each time you open one of the closures in the list. This makes it more labour intensive if you have to go through several to change settings. It should be constructed in such a manner that when you cancel or save a closure, you return to the same position in the list.
14 votes -
3D Building View, Compass to CarPlay, Stop Lights and Stop Signs
I would like to see Waze add 3D building views and Stoplights and stop signs, and allow compass to be shown in Carplay.
14 votes -
It would be helpful to know if a cross street has a traffic light when gauging how to look for your cross street to turn
It would be helpful to have an indicator for traffic light at an intersection when looking ahead to gauge when to turn
14 votes -
Show HN stop points for all levels
When viewing a road that is locked to a higher level, it is not possible to view the HN stop points. This makes it impossible to troubleshoot the issue without requesting an unlock that might not be required if nothing needs to be edited. Being able to view the stop point even when I can't edit would let me know if the HN needs to be changed before I request an unlock.
14 votes -
Enhanced Dynamic Segment Creation and Editing
Dynamic Curve Adjustment:
I propose introducing a dynamic segment creation tool in the Waze Map Editor. This tool would allow users to create a segment by selecting the start point and the endpoint, and then dynamically adjusting the curve by dragging the segment with the mouse. Additionally, the properties menu would enable further adjustments, including angle degrees, after the segment has been created.
Users can click to set the start and end points of a segment.
The segment curve can be adjusted in real-time by dragging with the mouse, providing a more intuitive and precise way to shape roads.Copy…
14 votes -
Use URL to add external provider
Sometimes WME fails to locate a right matching place from Google Maps, but the place can be found with Google search engine. As a solution I suggest to enable WME to assign a matching place also by a known URL from Google Maps.
14 votes -
Issue Tracker: better filtering of Map Suggestions
In the issue tracker, we can filter Map Suggestions by status: Open, Closed, or All, with a few subcategories under Closed. However, "Open" suggestions include (a) suggestions with status "Lapsed" and (b) suggestions that can't be accepted or rejected because "Change already applied to the map." Please add filters that would allow us to exclude (a) and/or (b) from the Open category.
14 votes -
Add an option to delete a community schedule
The scheduler does not have the option to delete a community schedule. Some schedules were added for testing, and some are not needed anymore since no school zone uses that schedule. It is suggested that any schedule that is not used at all, or when the defined time has expired, can be deleted.
14 votes -
Ability to create an Update Request on a Permanent Hazard segment
AS a Waze Editor Level 2, I'd like to be able to propose Update Requests on segments of any lock level that have a permanent hazzard like a speed bump. Actually it is not able to be done.
14 votes -
Drag-and-Drop Layer Ordering in WME
Hello,
I would like to suggest a UI improvement in the Waze Map Editor WME.
Previously years in WME, editors could reorder map layers by dragging them in the layers panel using drag handles, allowing layers such as Cities, GPS Points, and Roads to be placed in any order:
https://ibb.co/d0X1FCfJThis feature made it much easier to keep GPS points below roads so they did not obscure the map while editing. With recent changes, this option is no longer available.
I propose restoring custom layer ordering to improve map clarity and usability without relying on scripts or third-party tools.(During…
14 votes -
Highway shields instead of plain numbers in Livemap and WME
In the Waze Map Editor and in Livemap, highways are currently identified only by “badges” that display the route numbers, without their alphabetical prefixes.
It would be very helpful to update these highway badges in both WME and Livemap to use the highway shield standard that already exists in the app.
This change would not only improve clarity, but also promote visual consistency of highway shields across all Waze platforms.
14 votes -
Custom layers for map editor.
It could be helpful in map editing, if users could add their own layers. Just for their own use, for example shape or wms.
Users may have access to local map layers that they can use to add landmarks or edit roads. At the moment I can only rely on blurry bing aerial map, gps tracks and memory.14 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Require Place Update Request approvers to confirm deletions & other major changes
Please add an extra layer of confirmation before saving in WME, if approving a PUR would remove a Place, change it from an Area to a Point, or change it from Public to Residential (all actions that delete a lot of data).
A change of the place's primary name should also require an extra layer of confirmation before saving, this is even more common than deletion although less immediately destructive.
Why do I bring this up? A Rank 6 editor, or possibly Waze staff, recently deleted the Area Place for San Francisco International Airport. It had been locked at Rank…
14 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Option to select all segments in a closure at once
It happens that a road closure has to be adjusted (end time changed) or removed. It would be very useful if you could select all segments that belong to a road closure directly at once, eg based on start / end time, description, MTE.
(this can be especially useful for large scale works, closures with many small segments, or if you have to work in WME frequently on a mobile device)13 votes -
Truck mode, Modo para camiones
Español: Agreguen modo para camiones, ya que al no señalar donde hay tuneles o su altura pueden ocurrir accidentes y no quiero que eso suceda.
English: Add mode for trucks, since by not indicating where there are tunnels or their height accidents can occur and I do not want that to happen.
Portugués: Modo add para caminhões, pois ao não indicar onde existem túneis ou sua altura podem ocorrer acidentes e eu não quero que isso aconteça.
13 votes -
Record node RTCs in the edit history
Segment RTCs are recorded in the segment edit history, allowing editors to easily check along a route to see if a now-expired closure may have been the reason for a routing problem flagged up via a UR.
Now that we have the ability to also mark nodes as open/closed in order to allow/deny routing across a closure, having node closure states recorded in the history is also important, so that we can deal with URs related to routing problems along those cross routes as well.
ideally we'd be able to see in the history for a given segment if either…
13 votes -
Event with more than one other language
At the moment it is only possible to enter an englisch and optional one other language name for an WME Event.
Can this limit be increased for optional up to 4 or 5 names (including the englisch language)?That would be a gread addition for events that have official names for more than two languages, espiaclly in regions where boarders with more than one country or countrys which have multiple languages.
As example for boarder regions:
Belgium/Germany/Netherland
Austria/Switzerland/Germany
Austria/Hungary/Slovakia/Czech RepublicAs example for countrys with more than one local language:
Luxemburg (2 languages + englisch)
Switzerland (4 languages are spoken)…13 votes -
Make shields bigger in WME side panel
The little shields under the street name texts box are small and hard to see. Would be nice to have them bigger
13 votes
- Don't see your idea?