Map Editor Suggestions
Welcome to the Map Editor's suggestion box!
This is the place to share your ideas for improving the Waze Map editor.
1544 results found
-
Improve editor and driver effectiveness by reconfiguring "Map issue" and "closure" app buttons
Many drivers report temporary closures as map issues instead. This is very frustrating for us map editors! Temporary closures are extremely hard to diagnose, and often a waste of time to try, because many closures are already over by the time we see the reports. The fact that Waze under Apple CarPlay does not even provide access to the “Closure” feature has made the situation worse.
Please reconfigure the app's reporting tree to make closures more intuitive. I suggest renaming "Map issue" to "Route issue" (in English, something similar in other languages). This is how drivers already seem to perceive…
16 votes -
Ability to reorder or select primary picture
Allow the editor to select the primary picture shown in the app that best represents the location for the driver. Another option is to allow drag and drop ordering of all the pictures available in order of precedence.
16 votes -
Manual input for zoom level
With all the new zoom levels being planned, clicking the +/- to go up/down in zoom gets very tiring. This suggestion is to add a "Manual" number input field between the + and - to
a) display the zoom level (instead of using a tooltip) - disadvantage of tooltip is you have to hover your cursor over the zoom control
b) allow you to manually input the number you want the zoom to jump to. For example, you are at zoom level 20. You want to get to zoom level 12. Instead of clicking - 8 times, you type "12"…
16 votes -
Apply alternative name to all selected segments of the street
Today, if an alternative name is only assigned to some segments of a street, and you select also segments of the street without the alternative name, there is no indication of such status and no way to apply the alternative name to all segments. Please add such indication and action.
16 votes -
Sugiro a possibilidade de informação de lombadas nas vias
Possibilidade dos usuários informarem lombadas nas vias, como já existem as opções de informar outros perigos
16 votes -
Enable Voice alert for approaching Speed bumps
Hello Waze Team,
It would be so helpful for all Wazers to receive Voice alerts when approaching a speed bump so that we can prepare ourselves to slow down before approaching the speed bumps, as actually speed bumps has been added but it does not appear or notify you via voice alert that we are nearing a speed bump.
Grateful to look into adding voice alert when approaching speed bumps.
Thank you,
Kushal
16 votes -
Move Ferry, Railroad and Runway/Taxiway road types away from road type fast selection buttons
Those mentioned road types are about as rarely needed as the walking trail so moving those away from the normal road type selection buttons would be reasonable, there's no sense to keep those there. Maybe make submenu of those + Walking trail to that part of Unify Action Area?
This would have 2 benefits, it saves a little more of that limited space on left panel and also it helps to prevent accidental clicks which change road type and may go unnoticed when editor hits Save.
16 votes -
Waze Editor app
Make the editing easier with an app for android /and ios/
To make the editing fast and easier and accurate (in car)
Like adding street or speed cameras or even adding a buildings16 votes -
Please can you introduce sub and sub-sub folders etc. for saved places.
It would be great to be able to have and categorise sub folders with labels such as restaurants, hospitals, friends, clients etc.. These might be further nested to a higher level by area, county or country for example.
It is really very cumbersome to scroll through hundreds of saved places to find the one I want. When I travel abroad I have different countries places all mixed together in one long list. With nested sub folders, finding a particular saved place could be done in mere seconds.16 votes -
Allow editing geometry of segments with permanent hazards (PHs)
Currently, if a segment has a PH, it automatically becomes non-editable by lower level editors, even if they would normally be able to edit a given segment, had there been no PH on that segment. This prevents an editor from continuing, and requires intervention from a senior level editor.
The only way around it, is to remove the entire segment with a PH and add it again, in order to continue fixing geometries. However, there is a big downside to this approach, that it also removes added HNs.
One could isolate the PH, by sub-dividing the segment into three segments,…
16 votes -
House Number (HN) Mode recenters map
When hitting H to enter HN editing mode, the map is recentered and zoomed on the selected segment. There should not be any zoom or centering change if the current zoom level allows for HN editing.
16 votes -
WME Feed customise by country
WME Default loading is launching with feed showing KoiFish suggestions that are locked for almost all editors.
Most L1-2 editors cannot add these and cannot hide them either. As a display, it is very confusing for them.
Without taking away any choices in Feed selection, it would be nice if the WME Default Feed could either be selected by country as defined by coordinators or at least remove KoiFish suggestion as default load for all editors.
16 votes -
Ajouter un outil de signalement d'animaux perdus
Bonjour, je me permets de vous contacter pour vous soumettre une idée qui pourrait rendre votre application encore plus attractive et qui pourrait rendre service à un grand nombre de personnes...
Étant actuellement à la recherche du petit chien de ma sœur qui à fugué, j'utilise Waze pour vérifier les signalements d'animaux morts sur les routes (en espérant ne pas le retrouver de cette manière).
L'idée est qu'il serait vraiment très pratique de développer une option permettant de signaler des animaux errants... Encore plus pratique, un service permettant de signaler aux conducteurs qu'un animal est recherché dans une zone précise…
16 votes -
Allow editors to override default order in which area polygons are rendered.
Often times we find that area places intersect on the map and do not render in a way that makes sense. As an example, under the current scheme, a large water body will be drawn behind a smaller park polygon where these two types of objects are drawn together. To combat this, editors are required to either draw complex coastlines twice, or break up water objects to create smaller polygons that will be drawn on top. We could improve the appearance of the map significantly if we had some control over which objects appear in front of others. This could…
16 votesHey,
We would like to get some examples with permalinks in order to be able to check this suggestions.
Any example will be highly appreciated.
Thank you!
-
New Feature Request - When a photo must be rejected
It would be nice to have a comment window or a multi-choice button list in WME to send to the Wazer who submitted a rejectable photo so that we can tell them why the photo is being rejected:
- This photo shows a person's face
- This photo is too blurry
- This photo shows a license plate
- This photo is not helpful in identifying the place
...and so forth. It would be something more than just "this does not meet our community standards."
16 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Could you add express lane support.
Could you add express lane support. I would like to be able to edit the map for express lanes and when they are open be directed to take them when I can! Right now waze gets confused when I use the express lanes and tends to direct me on the slow freeway.
15 votes -
Causeway crossing times
Alert drivers to safe crossing times on Causeway crossings. There is a danger to life.
15 votes -
Closure layer behaviour on selected segments
When the closure layer is off and you have a segment with closure selected, the active closure is not showing when you switch on the closure layer. You need to unselect and reselect the segment to be able to see it. It would be nice if that can be resolved.
15 votes -
Allow to drag a node of a segment with closure
Dragging of a node is not allowed when the node is of a segment with closure on it, although the ID of the segment that includes the closure does not change. It is suggested to allow it.
As a temporary solution, it is possible to delete the closure, and then drag the node, and then reenter the closure (but still the closure is removed for the time it takes to complete the change).15 votes -
TR-panel shouldn't cover the TR-arrows
I've the impression that the behavior of the TR panel is changed. The panel remains longer visible after clicking one of the TR arrows. Nice in certain circumstances. Not so nice if you want to set all TR arrows of a crossing and some of the arrows are covered by the panel.
Suggestion:
Place the panel a bit further away from the crossing, making all TR arrows reachable.
The little triangle pointing to the selected arrow could be lengthened.15 votes
- Don't see your idea?