Map Editor Suggestions
Welcome to the Map Editor's suggestion box!
This is the place to share your ideas for improving the Waze Map editor.
1152 results found
-
Low Bridge indicator on map editor
Problem I see there is no low bridge indicator on map editor if it could be added with height restrictions ...it would be a big problem solver for us truck drivers. Who drive around the cities all the time. I my self have tried to navigate around cities .with low bridges.. and it's no fun ...you truckies will know what I mean
40 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Dark Mode in WME
You know you want it.
An example of what it could look like: https://imgur.com/a/9ckUEVf
40 votesHey,
Please note we're changing the status of this suggestion to Currently Not Planned, since we finalized our plans for 2024 and this idea won't be implemented this year.
We hope to include it in our plans for later down the line.
Thanks!
-
Improve/change the error message
Improve/change the error message when low level editors tries to delete the house number on streets with higher locks. Now we got "Error saving, try later" message. It gives, to editor, no idea of what the problem is, and the user may thinks that's a WME bug. By changing this message, it will give to editor and mentor/higher levels editor's more information to understand where the problem lies.
40 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Keep me logged into the WME
Would it be possible to keep me logged into the WME once i logged in, via cookies and cache. Currently i'm getting logged out of my session as soon as i close the tab. Even worse when i get a discord notification on my phone about a closure and i wanna close a road i need to login again there too each time and the UI and workflow is very cumbersome.
In short would it be possible that once i'm logged into the WME on a browser to stay logged in until i log out, or do a cache clear…
40 votes -
Conditional lane guidance
There are many cases in highways where there is an on-ramp shortly followed by an off-ramp. In those cases, the right lane/s serve for those who get on the HW from the on-ramp, as well as those who get off the HW on the off-ramp.
A wazer that gets on the HW from the on-ramp and has to continue on the HW should get lane guidance to go onto the left lanes when approachng the next junction of the off-ramp, otherwise, he might continue on the right lanes and get off the HW.
A wazer that comes on the HW…39 votes -
Move closures history to the Closures tab
Move the information about the closures history of a segment from the General to the Closures tab. This way the closures information won't interfere with important segment changes history and it will be easy to look the specific information. The "last date" will then be correct for each of them - segment changes and closure changes. Also, being in the Closures tab will allow for more data about the closure to be included (incorporating Script features - URO+ or the new WME History Enhancer).
https://greasyfork.org/en/scripts/449557-wme-history-enhancer
39 votes -
Automatically select road name text when editing
In the latest version of WME, when you open up the "edit" dialog to adjust a street name, and then click on the text box for "name" or "city", it drops the cursor at the end of the box. It would be nice if the existing text in the box is highlighted so you don't have to manually select the text to clear the box when editing the name of the street or the city name
39 votes -
No feedback provided if permalink is unable to select items
Currently there is no feedback given if one or more items are not selected when opening a permalink (i.e segments, places, URs, etc.).
For instance, I have a document with PLs of segments that are always closed during events (such as stadiums). If a segment ID is changed and therefore no longer linked in the PL, I have no way of easily knowing this.
Please consider providing some sort of warning if WME is unable to locate all the linked items.
39 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Issue Tracker Saved Filter: Should be able to modify/edit an already saved filter
I should be able to modify or edit an already saved search.
When saving a new filter, a dropdown of saved searches should be displayed, and if one is selected, an overwrite warning should appear. This should be alongside a "create new filter" option.
39 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
More Specific Error Messages
Specific error messages are very useful, and we can use more of them.
Here are some recent cases I have run across where it would be helpful to have a more-specific error message
RPP too far from identical HN (zoom out if necessary to highlight the HN location)
RPP too far from recently-deleted HN; try again after HN update. (zoom out to highlight the former HN location)
Improper restricted turn in JB (show and highlight the specific turn arrow which is the problem). Allow the turn and try again (https://www.waze.com/forum/viewtopic.php?f=211&t=276336&p=1922955#p1922761)By: voludu2
Link to original suggestion: https://www.waze.com/forum/viewtopic.php?f=1525&t=27659138 votesHey!
Hey!
Thank you very much for this suggestion.Detailed Error messages are part of the planned idea of the WME dev team these days.
We will keep you updated with any updates
Best,
Hezi -
Map Suggestions need hotkey
Map Suggestions are a layer in WME. If you want to see under the suggestion, you have to disable the layer. The only way to do that is via the Layer menu. There is no option for setting a hotkey.
38 votesGreat timing! We’re currently working on adding a hotkey for map suggestion. Keep an eye out for updates on the WME.
-
Automatic flag on unused places
Many places in the WME are not used for various reasons: The place was closed or moved, the place was created for an event that has passed, the place was wrongly created, the place exists but nobody uses it for routing. During the years, the number of such "garbage" places is growing, and will continue to grow forever.
There must be some way of cleaning these places from the map.
It is suggested that every place (excluding RPP and natural features) that nobody set it as a destination for 15 months, will be automatically flagged, with a reason that the…37 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
"All Issues" should have an editable area & level restricted (permissional area) filter.
I'm liking the new "All Issues" section but it needs another filter where I can filter out all the stuff I can't edit due to permissions such as areas outside my editable areas and level restricted edits.
I'm currently a L1 and want to move up higher but not having the ability to only see what I can edit, it's time consuming going through them all.
37 votes -
Junction box, add ability to demand a pass or mark as private for specific route
Junction box is still evolving so it would be good to add one more feature to it. We have situations where driving through a longer section of road is only permitted with certain conditions but driving to an address in between or to drive across the affected street from different direction is always allowed.
Thinking about a possibility that those conditions could be set as a pass and then apply it only to specific route in junction box. This could probably also be used in a way that you could set a specific route to be private road in routing,…
37 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Roads with permits for residents only
Very often there are streets that can only be used by residents.
It would be useful to be able to set the segments on the WME "residents only".
This way only those who add their home address on those streets in to the app will be able to use them.
It is different from editing a road as private, because it would only allow access to residents, whereas now if you search for a destination on a private road everyone can access it.37 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Flagging matches with permanently closed venues
With the "Enhanced Matching" between Waze and Google venues going live, some Waze venues are matched with 'Permanently closed' place from Google Maps.
While these are accurate matches, we won't know these places are permanently closed until an editor interacts with the place or a user reports it to us.
My suggestion is to flag such matches to be reviewed by editors. A PUR or something like that.
37 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Allow House Names to be added/editable in RRPs
In the UK, houses can be named instead of numbered. This is very common in rural parts of the country.
When an App user adds a Residential Place they can add in House Names within the address field. When the Residential Place Update Request reaches WME, we can approve the PUR, but once it's been saved, we cannot edit it due to the restriction WME puts on the Address field (numbers only with letter suffixes). We can't even move the RRP, the only thing we can do is delete it.
This request is to allow House Names to be added…
36 votes -
Allow closure overlapping
Hi,
very often I am notified of an event that needs closure after it started, then I go to select the many segments that must be closed.
When I want to add a proper closure on them, there are already dozen of closure made by drivers and I have to remove all of them one by one before adding mine. That's annoying because it is slow, and sometimes new closure are made by drivers while I am removing them :And overlapping closure are not a real problem because when it is done by waze app it happens often so…
36 votesHey!
Thank you for the suggestion.
In order to check this suggestion, we would like you to share some more examples with us.
We aim to get the understanding of how often this is an issue.Best,
Hezi. -
Show stop points in the House Numbers layer
The House Numbers layer currently displays only the location of the HN, but not the stop point on the related segment. In HN editing mode, when you select the HN, the stop point also becomes visible, with a dotted line from the HN to the stop point. Suggestion is to display the stop point and the dotted line as part of the House Numbers layer, even when not in HN editing mode. (This might either be visible only at a high-enough zoom level, such as 18, or be an option that the user could enable from the layers menu.)
36 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Allow hyphenated house numbers in RPPs
In my AM in Iowa there are several neighborhoods that have hyphenated house numbers. Here's an example: https://beta.waze.com/editor?env=usa&lat=42.40782&lon=-91.76381&zoom=6 Since they are on a private road RPPs should be used but can't be because hyphens are not permitted.
35 votes
- Don't see your idea?