Map Editor Suggestions
Welcome to the Map Editor's suggestion box!
This is the place to share your ideas for improving the Waze Map editor.
772 results found
-
Extra click required for approving a PUR
When approving/rejecting a PUR (new place, new photo, change in details), an extra click is now needed to close the window. Simply clicking approve/reject would close the window, but now you also have to click done to close the window. This wasn't the case until WME v2.109 (released August 2022)
Screen capture (approving a new place): https://www.dropbox.com/s/v5r8lfe1afe7s5j/purnew.gif?dl=0
Screen capture (rejecting a new photo): https://www.dropbox.com/s/j6o4anmu6afxay8/purphoto.gif?dl=077 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Seasonal Roads
In almost every climate, there is some time of seasonal weather condition that closes roads at least temporarily during a season.
For example, in the winter, some municipalities will not plow certain roads where the roads are not servicing any addresses. These roads are legally open, but may not be passable by most vehicles except during periods of melt or the end of the season melt. In other areas, seasonal rains or snowmelt mean that dirt roads are impassible to most vehicles several days at a time due to mud, but are usable in drier spells during that season. Because…
76 votesGreat timing! We’re currently working on your suggestion about avoiding seasonal roads. Keep an eye out for updates on the WME.
-
Do not allow user selection on buttons
Buttons in WME (UR, PUR, etc.) should not allow the user to select the text. There is no functional use for editors to be able to select this text and attempting to click can result in the text being selected instead of registering a click on the button
CSS:
user-select: none;75 votes -
ICON Change on RTC for Turns
Currently when you select a segment with an RTC on a turn arrow, you just see the white fence/barricade icon that you see on the node. You then have to hover over the turn arrow, then click on Turn Closures and go to the window that popped up to see if these are active or finished.
I would like to see the icon changed to the the Red Closed symbol when active, like we see on segments when they are actively closed, and then the grey circle we see when they are finished. It would help tremendously in deciding if…
74 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
School Zones Speed limit 40km 2:30-4pm weekdays
We need to know the school zones and change the speed limit around these times near school which the time is 2:30-4:00 pm Monday to Friday only around school zones this feature should be added in so people like my self don’t get confused with the on screen speedometer
74 votesThanks for the suggestion! We're currently looking into ways to incorporate this idea into a feature. We'll keep you posted as this develops!
-
It would be a great idea if the buttons to show the types of existing roads had the colors of the different types of roads in the WME.
It would be a great idea if the buttons to show the types of existing roads had the colors of the different types of roads in the WME.
72 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Add support for Passing Lane Alerts
Add functionality when on main single lane roads so the User can opt to display the distance to the next passing lane. The location and length of passing lanes would be added by editors and would give drivers an indication of how long until the next passing lane (and once in the lane, how long until it ends), potentially preventing drivers from taking unsafe risks and passing when not safe.
Passing lanes are used extensively in New Zealand and Australia, and I imagine are also used around the world.
72 votes -
Creating an traffic event from a RTC automatically
Waze wants more traffic events additional to the RTC in order to benefit from the metadata.
Adding a larger amount of traffic events as before needs exceptionally more time and effort.- First, visiting the event tab and creating an event with name, duration etc.
- Adding the respective RTCs with again entering name and duration. 3.Again, going to the event tab and submitting the event.
This is too much work to keep up in general.
So solve this, I suggest the possibility to create an event from the closures tab automatically using the already submitted closure name and duration (as an…
71 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Move layer, refresh, and permalink icons when chat is open.
When you have the chat panel open, the layer, refresh, and permalink icons are hidden. That means when working with an editor in chat, the panel has to be closed to grab a link. Then chat has to be opened again to share it.
70 votesGreat timing! We’re currently working on it. Keep an eye out for updates on the WME.
-
combine Lane guidance segments
With the newly implemented Lane guidance we see new problems rising up.
In belgium, beeing densly populated, we somtimes have several entry's or exits of the highway following up on each other very closely.
sometimes even as close as 20-50 meters.I would like to have a sort of junction box type of tool to combine 2 lange guidance segments.
for example:
2 highway exits within 50 meters. I want the Lane guidance before the first exit to allready show in what lane I have to stay if I have to take the 2nd exit.It's kind of hard to…
68 votesHey,
Thank you for this suggestion.
We have added it to our back log. It will take some time. But it will be be solved as part of JB revamp.Thanks
-
House number change history
When selecting a house number the interface no longer shows who last modified the house number. History on the segment doesn't always show what was change (it might show added or deleted, but not moved or edited). Segment history needs to have more detail on what was done.
67 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Show Where Community Schedules Are Used
In the Community Schedules section of the Waze Map Editor, please make the "Used In" count clickable or provide a way to show a list of school zones using a specific schedule. Currently, it only shows a number, not the actual locations. Recently, I was trying to find a school zone with an incorrect schedule so I could remove it and then delete the Community Schedule, but I couldn’t locate it even after searching an entire province and four major cities.
66 votesGreat timing! We’re currently working on it. Keep an eye out for updates on the WME.
-
Invert PUR Filter by type
With the latest release of WME, we can now filter place update requests (PURs) by type. There should be an option to invert the filter. By doing this, I can select one type of PUR and show everything except that type.
65 votesGreat timing! We’re currently working on the option to invert the filter. Keep an eye out for updates on the WME.
-
copy/paste for turn closures / RTC on turns
new turn closures feature in WME:
We need a copy/paste feature for turn closuresIf you have to setup more than one turn closure, you have to enter description, start/stop date, start/stop time and MTE every single time.
On a closed segment next to a T junction you have to set 4 turn closures, on a + junction 6 times.Why is it better to close e.g. 4 turns than the segment?
If the segment is closed Waze will route you the node that is closer to your destination. Maybe this is the closed junction you don't wanna go through.…65 votes -
Allow the WMEb "BETA" indicator to link back to the production WME
In the latest beta, there is now a [• BETA] indicator in the header. Please consider adding a way to use this indicator as a shortcut back to the production WME.
Perhap click to open a tab of with the PROD wme at the same spot, and hover+CNTL+C (or right click) to copy a PROD wme permalink.
We'd like to encourage users to edit the BETA wme as much as possible, but when collaborating or posting to public forums, we should make it as easy as possible to share PROD permalinks.
64 votes -
Edit Toll Prices in the WME
The procedure to edit toll prices is complex and only certain users per community can edit those prices.
Toll prices should be editable directly in the WME to avoid a complex process.
64 votes -
Reopen Update Request
A key could be added, available for a certain period of time from the closing of the UR (e.g. 1d, 6h, 30min), to be able to reopen it and change its status, it is useful when a UR is closed by mistake (if the key is displayed for a few minutes after closing) or if the user replies or adds details after closing (if viewed for a few hours after closing)
The button could only be made visible to those who commented on that issue first or otherwise participated in the conversation.63 votes -
New filter "Older than" should apply for URs with no comments
The new UR filter "last comment time: older than: should apply also to those URs with zero comments (automated comment). This way we could monitor URs with automated comments that have not been answered yet by an editor after x days.
62 votes -
Timed reminder for MCs
Would like to be able to add a reminder based on date/time on an MC. Good for reminder to check on construction or to check for updated aerials, etc. Perhaps allow for both author and subscribers.
61 votes -
Add a new UR Issue filter "Last comment by" - "Not Me"
Please add a new UR filter in the "Last comment by" drop-down - called "Not me".
In conjunction with the "Comment by me" filter, this will then allow me to see all URs that I have commented on in the past, but I wasn't the last person to reply. This will include the reporter and other editors.
Currently, if I select Reporter, I cannot see URs that other editors have last commented on. If I select All, I will see them, but also all of my reports that I was the last commenter on.
59 votes
- Don't see your idea?