Map Editor Suggestions
Welcome to the Map Editor's suggestion box!
This is the place to share your ideas for improving the Waze Map editor.
731 results found
-
Make the UR Issues Tracker a Tracker and not a Filter
Currently the Issues Tracker is not a tracker, but rather a filter because it hides other URs (issues) on the map.
Ad an option not to hide URs on the map and display the default view (default setting in tracker)... so yes, we need to have some default options (that each user can change)... and when this option not to hide URs on the map to display the default view (including URs).
For example:
I always leave everything to see on my map - my default.
When searching for new URs or looking for URs with answers from reporters, I…133 votes -
Improve RPP editing when it conflicts with HN layer
When adding or editing RPP, if there is a conflict with the HN layer (i.e. too far), then the WME issues an error that prevents you from saving your edit. Thus, you cannot add or update this RPP.
To resolve the issue you need to perform the following steps:
1. Update/Remove the address in HN layer
2. Wait for next (successful) map build
3. Add the RPPThis is an annoying procedure that should and can be avoided.
The issue can be handled in one of the following ways:
1. Verify the RPP against the most updated data either in…132 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Allow closure creation in "Current live map/snapshot" mode
At the moment, it is no longer possible to add a closure to a segment you have removed or split up, even though this segment is still being used live in the app. If it were possible to add closures in the snapshot mode (recently renamed to "Current live map"), even with a strict time limit, our life would become a lot easier during road works.
At the moment, we need to apply segment restrictions, wait for the map update, remove the closure, make our changes, wait for the map update and then probably add new closures. If we can…
130 votes -
Allow 3 choices for PURs that report closed places. 1) Ignore; 2) edit place 3) delete place
Currently we can only ignore a PUR that reports a place closed or delete the closed place. We have no other choices available. Often, we need to make changes in operating hours or make other changes but NOT delete the place. If we ignore the PUR, it counts against the reporter. We need a third choice that gives the reporter credit for the report but allows us to keep the place and make appropriate changes to it.
127 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Directly edit water layer
The water layer should be editable.
The water layer import is outdated and frequently lakes and ponds are drawn where roads and houses now exist.
We can add hacks to WME to suppress the display of these water features in the Waze app but this is not ideal.
125 votes -
Close a place for a fixed period
Sometimes I receive UR for places closed for works (construction site, temporary closure).
It would be nice for editor to be able to close a place for a fixed period, as you can close a road.I had the case on 2 gas stations under construction closed for several months. A "temporarily closed" button or closing dates with automatic reopening would be great!
116 votes -
Allow forcing a closure to expire (instead of deleting the closure)
The WME shows now the status of all recently finished and all active closures. A deleted closure will not be visible anymore.
For that reason, we prefer to "finish" closures instead of deleting them.
It would be nice to have an option in the context menu of closures, to make the closure expire, by setting its end moment to now.113 votes -
Add postal codes/ZIP codes to Waze address editor
When a Waze app user searches for an address added using the Waze Map Editor, it does not show the postal code. But with Google addresses, the postal code is shown. Please add postal codes to the WME.
113 votes -
"Hide street name" option
Include a checkbox near the street name for segments, so that when it is selected the name of the street does not appear on the live or client map. This would be useful for segments that have a name that would benefit directions, but could be confusing to see on the map. For example, seeing the name "Main St Frontage Road" on the app, especially when zoomed out enough that the name appears right over "Main St", could easily cause confusion and take longer for the driver to comprehend the map, especially if they are familiar with the area.
111 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Let Editors set their preferred date format in WME Settings
Different regions of the world use different date/time formats, and even within some regions individuals may have their own preference for a date format that's most comfortable for them. Rather than have WME use one format for entering and displaying dates, allow the user to configure their preferred format on the WME Settings page, the same as configuring Imperial vs. Metric units. WME should then honor that date format on all date entry and display fields.
Sample date formats to offer could include "dd-mm-yyyy", "mm/dd/yyyy", or my preference for a default the ISO 8601 "yyyy-mm-dd" international standard format. I suggest…
107 votesGreat thinking! We’ll share with the team; they’re always interested in new feature ideas.
-
Connect an Advertising Pin to its Place on the WME
Very often it happens that advertising pins are not placed in the correct place on the map, which leads to routing errors. It would be very useful to be able to link these Pins to the corresponding Place entered by the editors in the correct place in the WME, so that the routing to these destinations works correctly. (as we already do for the link to Places on Google Maps).
106 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Automatically send UR reminders and mark as 'not identified' if no reply
User Reports (URs) come in by the truckload. Despite a message from an investigating editor, only 10% of URs will receive a reply. This represents a significant amount of time by editors, particularly senior editors managing large areas, to the manual handling of individual URs. Since 90% of the URs result in the same process, help us streamline and automated it so we can focus our valuable time on productive investigations and edits that will value add to Waze.
I propose an additional tick box under "Follow conversation" that says along the lines "Auto reminder and mark as not identified."
…
106 votes -
Editing fuel types for each Gaz station in WME
It would be nice if the types of fuel at Gas stations could be created, selected and sorted for each specific Gas station when editing directly in the WME.
The main thing is that for each Gas station it was possible to create its own set of fuel types.
For example:
for one - Gas, 92, 95, Diesel
for the other - 92, 95, 98, Diesel
etc.Because all Gas stations are Different!!!
104 votes -
Improve House Numbers Editing Interface Clarity
Since the version 2.272, the HN interface has become visually overloaded mainly on cross roads. In the previous version, entering house numbers mode would visually isolate the numbers belonging only to the selected street. This behavior was much more intuitive and provided a cleaner, distraction-free environment for editing.
We suggest restoring this functionality - either by default or as an optional toggle - so that only the house numbers from the selected street are shown during editing. This change would significantly improve clarity, reduce errors, and enhance the overall editing experience.
Thank you for your consideration.
104 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Show client app version in URs User Preferences field
Currently WME shows various useful information in URs, such as usernames (if available), report source, and various other User Preferences. Please also include app version from which the UR was generated.
This would be useful when troubleshooting certain reports, as some features may not be available to such users and also that some very old version of the app include 'Reported map issue' in the description field by default.
This, at the time of writing, also affects automated replies to URs, from Map Team account.
For e.g., see https://www.waze.com/discuss/t/introducing-automatic-replies-for-urs-without-description-enhanced-filtering/397655/122?u=darkestways thread.
104 votes -
Incorporate Place Interface Enhancements Script RPP Editing Options
The Place Interface Enhancements ("PIE") Script provided an easy way to add RPP's by offering to auto-populate the 'street name' field with values from the nearest street. Optionally, one could have it ignore the checking for the street name from nearby PLRs and PRs:
(Options):
- Use street name from closest segment
- Use city name from closest segment
- When the primary is "No city" look for an alt city
- Ignore PLRs & unnamed PR when using closest segment's name and cityThe script stopped working after an update to WME earlier this year. It would be an…
103 votes -
Save all native WME client settings on server side
Base WME client settings are only saved to the local machine, as every time you log in somewhere on a new workstation, you have to go restore your preferences such as Environment, Language, Imperial/Metric, Compact Mode, Transparent Arrows, etc.
However, with the implementation of Issue Tracker, saved filter settings are immediately accessible upon a new login, proving that WME user settings can be saved at the server end.
Please save all native WME settings on the server side so that they are already in place when an existing editor logs in on a new workstation for the first time.
103 votesGreat timing! We're currently working on making your preferences accessible when logging in on a different device. Keep an eye out for updates on the WME.
-
Sub-cities
The goal is to have a mechanism for attaching localities or hamlets to a city.
The French wiki presents a number of situations (https://wazeopedia.waze.com/wiki/France/Routes_Nommage).
There is also the management of districts or neighborhoods of large cities that could also benefit from this feature.101 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
To automatically remove duplicates from "external providers"
If you have have duplicates in the "external providers" of a POI, WME should automatically clean it. See example for this one which has twice the same Google Maps place :
100 votes -
Prompt user to save Lane changes if deselecting segment
After editing Lanes, it's far too easy to lose the changes by accidentally deselecting the selected segment you are editing if you don't apply the changes beforehand.
This suggestion is to recognise that changes have been made in Lanes (or road width), and prompt the user to apply or cancel the changes if they deselect the segment they are editing.
99 votes
- Don't see your idea?