Map Editor Suggestions
Welcome to the Map Editor's suggestion box!
This is the place to share your ideas for improving the Waze Map editor.
339 results found
-
UR Reply via Email
This is slightly outside the scope of WME Beta, but in general about our ability to provide a better service for end users.
Allow users to reply to URs via email. Many support systems allow this, and in most cases, the process is fairly simple. The process might be as follows:
- User submits a request/issue from the app while they drive
- We (editors) get a pin on the map with submitted details as before
- User gets an email with a unique response email address (something like 8766123133@requests.waze.com)
- User gets instructions on how to view the map issue they submitted
- …
345 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Show Where Community Schedules Are Used
In the Community Schedules section of the Waze Map Editor, please make the "Used In" count clickable or provide a way to show a list of school zones using a specific schedule. Currently, it only shows a number, not the actual locations. Recently, I was trying to find a school zone with an incorrect schedule so I could remove it and then delete the Community Schedule, but I couldn’t locate it even after searching an entire province and four major cities.
66 votesGreat timing! We’re currently working on it. Keep an eye out for updates on the WME.
-
Move Previous Build Button
The small bar with tile build information moves and sometimes covers elements as different parts of WME are accessed. With the exception of my phone in landscape orientation, there seems to be an excessive amount of extra space on the tile bar. My suggestion is to move it to the tile bar on the left, near the settings button.
87 votes -
Issue Tracker Option ~ Add ability to have Map Area and Managed Area at same time
We need the ability to have the "Map area" option selected along with either the "Managed area" or "Specific location" option selected.
Why you may ask?
This just happened to me.
I keep my settings as "Managed area" or "Specific location" so that I can work URs, PURs, etc anywhere any my managed area or State without being at a specific map area
Someone contacts me by chat for assistance in a location that is not in my managed area or specific location (whichever I have set) and I help them out. Reporter is a happy camper.
Since I don't…
101 votes -
Street Parking
We have parking lot roads that cover most parking situations, but there's not a great mechanism for handling street parking on public streets where it doesn't make sense to mark a road as a parking lot road. Examples: Many residential neighborhoods, many downtown areas.
Suggestion is to add a flag to all driveable road types except freeway and PLR/PR to indicate "street parking is allowed", along with pricing information similar to how we handle parking lot areas. This could be part of the next phase of the parking project.
33 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Automatically select road name text when editing
In the latest version of WME, when you open up the "edit" dialog to adjust a street name, and then click on the text box for "name" or "city", it drops the cursor at the end of the box. It would be nice if the existing text in the box is highlighted so you don't have to manually select the text to clear the box when editing the name of the street or the city name
38 votes -
Make RPPs a bright pink
Change the colour of the RPP from a camouflaged dusky pink (same shade used to literally camouflage reconnaissance Spitfires in WWII) to a bright pink like #fa0584 to make it more visible in urban backgrounds.
27 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Extra click required for approving a PUR
When approving/rejecting a PUR (new place, new photo, change in details), an extra click is now needed to close the window. Simply clicking approve/reject would close the window, but now you also have to click done to close the window. This wasn't the case until WME v2.109 (released August 2022)
Screen capture (approving a new place): https://www.dropbox.com/s/v5r8lfe1afe7s5j/purnew.gif?dl=0
Screen capture (rejecting a new photo): https://www.dropbox.com/s/j6o4anmu6afxay8/purphoto.gif?dl=077 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Remove unpaived attribute from Off-road / Not maintained segments
An Off-road / Not maintained segment is unpaived by definition and should not have the unpaived attribute. We encountered navigation problems to destinations on such segments because of this attribute, so in Israel we don't allow to set this attribute. New editors are not aware of this problem, and think that they should set it to unpaived, and we have to explain it to them.
Please remove this attribute in this type of segments in the WME, and it will save a lot of effort.42 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Automatic UR handling
An update request (UR) without any text can be automatically handled:
1. There will be an automatic system response to the UR that will invite the user to add more details to his request in the WME (include a link) or in the forum (include a link to the local community forum). The user will get an e-mail as fr any other manual response.- Every such UR that has no more responses (other than the automatic one) will be closed as "not identified" after 7 days.
That automatic handling will save a lot of time wasted by area managers. A…
95 votes -
"Sharp" Turn Instruction
Create a "sharp" turn instruction. Similar to "keep" instructions being an angle <44 degrees, a sharp turn instruction could be one greater than 135 degrees but less than 170 (which would be u-turn). Other apps already have this instruction and it would greatly complement lane guidance visuals that use the sharp left/right turn symbol. Alternatively, it could be provided only as a TIO for use only where the community finds appropriate.
114 votesWe are looking into this suggestion's feasability and will update when we have some answers.
-
Show Entry Point Name changes in POI history and PUR
I noticed that Changes to the name of Entry Points of places won't show up in the POI history, it simply says "Updated Entry Points".
This also affects PURs, since you don't know what the Wazer/Editor is suggesting until you accept it.
I reckon those requests mostly get declined since there's no visible change.My suggestion is to add those name changes to the history and PURs.
87 votes -
Connect an Advertising Pin to its Place on the WME
Very often it happens that advertising pins are not placed in the correct place on the map, which leads to routing errors. It would be very useful to be able to link these Pins to the corresponding Place entered by the editors in the correct place in the WME, so that the routing to these destinations works correctly. (as we already do for the link to Places on Google Maps).
106 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
SLUR behavior (speed limit update request)
Hi,
a few month ago Irad told to make suggestions about SLUR, I took my time but here it is :In the beginning, we had a SLUR for every request, and there were way too much of them because sometimes there is a lag in showing the new speed limit so people were reporting speed limit that were already good, and also because speed limit were not visible in the client until you exceeds the limit.
The idea of grouping them making cluster was implemented (against our will), and according to Merav last time I spoke with her about…
29 votesHey!
Thank you for this suggestion.As it was announced in the forum we are currently working on improving the SLUR workflow and user experience.
This suggestion will be taken into consideration in the work.So, thank you again we will update accordingly.
Hezi
-
Disable Permanent Hazards on Non-Driveable Roads and Pedestrian Paths
Disable the ability for permanent hazards to be snapped to and/or placed on non-driveable roads (runway and railroad) and pedestrian paths (routable, non-routable, and stairway) in WME. PHs intended for driveable roads at junctions with these road/path types can be accidentally placed on the incorrect non-driveable segment. While easy to check and correct when placing, this could preemptively prevent mistakes.
159 votesThanks for your feedback. At this time, this doesn't fit on our roadmap, but we'll keep it in mind for future product planning.
-
Add “Pedestrian Crossing Zone” Warning in WME Map Editor
💡 Idea Description:
I suggest adding a new warning option in the WME Map Editor named “Pedestrian Crossing Zone” to be used in areas with frequent pedestrian movement, such as:
Local markets and shopping centers
Hospitals and medical facilities
Schools and universities
Parks and recreational areas
In reality, there are visible pedestrian crossing signs in these places, but this warning option does not currently exist in WME. As a result, drivers are not alerted to slow down or pay attention to crossing pedestrians in these locations.
🚗 Importance of the Suggestion:
Adding this warning will help drivers to:
Reduce speed…
73 votesGreat thinking! We’ll share with the team; they’re always interested in new feature ideas.
-
Hazard addition to go to suggest an edit
Let all editors add Permanent Hazards but since it is locked by level they can be moved to "Suggest an edit" so spamming with permanent hazards or fake hazards are not added to the map.
37 votesGreat thinking! We’ll share with the team; they’re always interested in new feature ideas.
-
Close a place for a fixed period
Sometimes I receive UR for places closed for works (construction site, temporary closure).
It would be nice for editor to be able to close a place for a fixed period, as you can close a road.I had the case on 2 gas stations under construction closed for several months. A "temporarily closed" button or closing dates with automatic reopening would be great!
116 votes -
Allow forcing a closure to expire (instead of deleting the closure)
The WME shows now the status of all recently finished and all active closures. A deleted closure will not be visible anymore.
For that reason, we prefer to "finish" closures instead of deleting them.
It would be nice to have an option in the context menu of closures, to make the closure expire, by setting its end moment to now.113 votes -
Allow editors to override default order in which area polygons are rendered.
Often times we find that area places intersect on the map and do not render in a way that makes sense. As an example, under the current scheme, a large water body will be drawn behind a smaller park polygon where these two types of objects are drawn together. To combat this, editors are required to either draw complex coastlines twice, or break up water objects to create smaller polygons that will be drawn on top. We could improve the appearance of the map significantly if we had some control over which objects appear in front of others. This could…
16 votesHey,
We would like to get some examples with permalinks in order to be able to check this suggestions.
Any example will be highly appreciated.
Thank you!
- Don't see your idea?